Product Center – Foshan Chantong Fan Manufacturing Co., Ltd.

High-Temperature Fan Series

W5-47 / W4-72 / W9-28 and others

Product Introduction

Chantong manufactures a complete range of high-temperature fans, including the W5-47, W4-72, W9-28, W9-19, W9-26, WT-12 and vertical models.

Primary Uses

Used for high-temperature hot-gas circulation in heating, soaking, baking, ageing and annealing furnaces in metallurgy, building materials, power and coating industries — enhancing in-furnace heat exchange, reducing temperature differentials and exhausting high-temperature flue gas.

Operating Conditions

Conveyed medium: air or other low-corrosivity / inert gases. Flue-gas temperature up to 800°C. When the gas has high dust loading, an upstream dust collector with at least 85% efficiency is required so that the hard-particle content reaching the fan does not exceed 150 mg/m³.

Model Series

W5-47 High-Temperature Blower W4-72 High-Temperature Blower W9-28 High-Temperature Blower W9-19 High-Temperature Blower W9-26 High-Temperature Blower WT-12 High-Temperature Blower WXT Vertical Stirring Fan

Product Images by Model

Explosion-Proof Fan Series

BWG / BT35 / B4-72 and others

Product Introduction

Chantong's explosion-proof line includes the B4-68, B4-72, B4-79, B9-19, B9-26, BT35, BKL and BWG gas blower models.

Primary Uses

Mainly used for ventilation, forced-air supply and low-concentration flammable / explosive gas conveying in factories, mines, oil and gas fields, chemical plants and refineries where volatile gases or dust are present.

Operating Conditions

Conveyed medium: air or general flammable / explosive gases that are non-corrosive to steel and contain no sticky substances. Medium temperature −20 to 80°C, relative humidity ≤90%, dust and hard-particle content ≤150 mg/m³.

Special Notes

Chantong's explosion-proof fans are made of explosion-resistant alloy aluminium and similar materials, deliver excellent aerodynamic performance, and are paired with high-grade explosion-proof motors.

Model Series

BWG Gas Blower BT35 Explosion-Proof Axial Fan BKL Explosion-Proof Adjustable Aluminium-Blade Ventilator B4-68 Explosion-Proof Centrifugal Fan B4-72 Explosion-Proof Centrifugal Fan B4-79 Explosion-Proof Centrifugal Fan B9-19 Explosion-Proof Centrifugal Fan B9-26 Explosion-Proof Centrifugal Fan

Product Images by Model

BKL Explosion-Proof Adjustable Aluminium-Blade Ventilator

Corrosion-Resistant Fan Series

FT35 / F4-72 / titanium fan, etc.

Product Introduction

Chantong's corrosion-resistant range includes the FT35, F4-72, FGT40, F4-79, WFDZ, DWT roof fan and titanium fan models.

Primary Uses

Mainly used for ventilation in chemical plants, electronics factories, electroplating shops, dye houses, painting workshops, laboratories and basements where low-concentration weak acid / weak alkali corrosive gases are present.

Operating Conditions

Conveyed medium: air, general weak acid / weak alkali gases or high-temperature water vapour, free of sticky substances. Medium temperature −20 to 80°C, dust and hard-particle content ≤150 mg/m³.

Special Notes

Chantong's corrosion-resistant fans are made of fibre-reinforced plastic (FRP), acid-resistant stainless steel, titanium steel or titanium alloy.

Model Series

FT35 FRP Axial Fan F4-79 FRP Corrosion-Resistant Fan F4-72 Stainless-Steel Centrifugal Fan FGT40 F4-79 WFDZ Stainless-Steel Corrosion-Resistant Fan DWT Roof Fan Titanium Fan

Product Images by Model

WFDZ Stainless-Steel Corrosion-Resistant Fan

General-Purpose Centrifugal Fans

4-68 / 4-72 / 4-79 / 5-90, etc.

Product Introduction

Chantong's general-purpose centrifugal fans include the 4-68, 4-71, 4-72, 4-79 and 5-90 models.

Primary Uses

Mainly used for ventilation, HVAC and smoke / waste exhaust in workshops, warehouses, shopping centres, hotels, restaurants, offices, conference rooms, theatres and other large buildings, as well as for high-volume cooling, drying and dust extraction in industrial and civil processes.

Model Series

FBG-12玻璃钢化炉高压风机 4-68 Centrifugal Ventilation Fan 4-71 Centrifugal Ventilation Fan 4-72 Centrifugal Ventilation Fan 4-79 Centrifugal Ventilation Fan 5-90 Centrifugal Ventilation Fan

Product Images by Model

← General-Purpose Centrifugal Fans

4-68 Centrifugal Ventilation Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
2.8A	2900	1	1131	971	Y802-2	1.1
		2	1319	970
		3	1506	961
		4	1696	922
		5	1885	853
		6	2073	765
		7	2262	657
3.15A	2900	1	1625	1246	Y90S-2	1.5
		2	2093	1246
		3	2352	1226
		4	2630	1177
		5	2889	1098
		6	3167	981
		7	3435	853
3.55A	2900	1	2708	1608	Y100L-2	3
		2	3092	1608
		3	3477	1569
		4	3861	1510
		5	4245	1402
		6	4629	1255
		7	5013	1118
4.A	2900	1	3984	2070	Y112M-2	4
		2	4534	2060
		3	5083	2011
		4	5633	1942
		5	6182	1834
		6	6732	1628
		7	7281	1432
4.5A	2900	1	5790	2658	Y132S2-2	7.5
		2	6520	2628
		3	7355	2599
		4	8137	2462
		5	8919	2296
		6	9702	2059
		7	10485	1834
4.5A	1450	1	2895	667	Y90S-4	1.1
		2	3295	657
		3	3678	638
		4	4069	619
		5	4459	570
		6	4851	520
		7	5242	461
5.A	2900	1	8050	3315	Y160M2-2	15
		2	9123	3296
		3	10197	3187
		4	11270	3030
		5	12343	2794
		6	13416	2059
		7	14490	2305
5.A	1450	1	4025	824	Y100L1-4	2.2
		2	4562	814
		3	5098	794
		4	5635	765
		5	6172	706
		6	6708	647
		7	7245	579
6.3A	1450	1	8320	1324	Y132S-4	5.5
		2	9420	1305
		3	10467	1275
		4	11540	1226
		5	12635	1128
		6	13687	1040
		7	14761	922
7.1A	1450	1	12290	1700	Y160M-4	11
		2	13830	1670
		3	15370	1622
		4	16900	1533
		5	18440	1453
		6	19970	1320
		7	21820	1193
7.1A	960	1	8140	742	Y132S-6	3
		2	9160	734
		3	10170	710
		4	11200	680
		5	12210	600
		6	13220	580
		7	14240	517
6.3C	1250	1	7172	981	Y112M-4	4
		2	8103	971
		3	9024	942
		4	9949	902
		5	10874	843
		6	11799	765
		7	12724	687
6.3C	1600	1	9180	1608	Y132S2-2	7.5
		2	10365	1589
		3	11550	1549
		4	12734	1471
		5	13918	1333
		6	15103	1225
		7	16287	1118
6.3C	1800	1	10328	2040	Y160M1-2	11
		2	11680	2010
		3	12893	1952
		4	14325	1862
		5	15658	1749
		6	16991	1589
		7	18324	1400
6.3C	2000	1	11478	2511	Y160M2-2	15
		2	12955	2431
		3	14437	2413
		4	15917	2305
		5	17398	2158
		6	18879	1971
		7	20359	1756
6.3C	2240	1	12852	3159	Y180M-2	22
		2	14511	3109
		3	16169	3030
		4	17828	2893
		5	19486	2720
		6	21144	2491
		7	22803	2200
7.1C	1250	1	10598	1258	Y132M-4	7.5
		2	11926	1244
		3	13241	1204
		4	14582	1153
		5	15887	1017
		6	17212	950
		7	18540	876
7.1C	1600	1	13556	2069	Y160M2-2	15
		2	15265	2040
		3	16974	1974
		4	18641	1886
		5	20399	1728
		6	22108	1606
		7	23137	1440

Original scan (reference)

← General-Purpose Centrifugal Fans

4-71 Centrifugal Ventilation Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.15A	2900	1	1601	1235	Y90S-2	1.5
		2	1919	1222
		3	2147	1199
		4	2362	1111
		5	2617	992
		6	2854	873
		7	3073	746
3.15A	1450	1	845	326	Y90S-4	1.1
		2	959	317
		3	1074	299
		4	1181	277
		5	1308	247
		6	1422	218
		7	1536	186
3.55A	2900	1	2420	1620	Y90L-2	2.2
		2	2747	1571
		3	3073	1525
		4	3381	1412
		5	3745	1261
		6	4072	1110
		7	4399	948
3.55A	1450	1	1210	403	Y90S-4	1.1
		2	1373	391
		3	1537	380
		4	1690	352
		5	1873	314
		6	2063	277
		7	2199	236
4.A	2900	1	3270	2231	Y112M-2	4
		2	3764	2114
		3	4259	1984
		4	4726	1831
		5	5221	1675
		6	5715	1464
		7	6207	1258
4.A	1450	1	1635	554	Y90S-4	1.1
		2	1882	528
		3	2129	493
		4	2333	465
		5	2610	412
		6	2858	365
		7	3105	314
4.5A	2900	1	4656	2829	Y132S2-2	7.5
		2	5360	2681
		3	6064	2515
		4	6729	2321
		5	7433	2100
		6	8137	1855
		7	8842	1594
4.5A	1450	1	2328	702	Y90S-4	1.1
		2	2680	665
		3	3032	625
		4	3365	575
		5	3717	522
		6	4069	463
		7	4421	397
5.A	2900	1	6547	3501	Y160M1-2	11
		2	7513	3380
		3	8479	3140
		4	9411	2876
		5	10411	2612
		6	11377	2329
		7	12343	1992
5.A	1450	1	3274	867	Y90L-4	1.5
		2	3757	827
		3	4240	773
		4	4723	719
		5	5206	653
		6	5689	579
		7	6172	495
6.3A	1450	1	6548	1379	Y112M-4	4
		2	7818	1316
		3	8481	1236
		4	9447	1144
		5	10413	1039
		6	11379	920
		7	12345	787
6.3A	960	1	4335	604	Y100L-6	1.5
		2	5075	577
		3	5615	543
		4	6254	501
		5	6894	455
		6	7533	403
		7	8173	345
6.3C	900	1	4066	530	Y90L-4	1.5
		2	4664	505
		3	5264	476
		4	5864	440
		5	6463	399
		6	7063	354
		7	7663	303
6.3C	1120	1	5058	823	Y100L1-4	2.2
		2	5805	785
		3	6551	740
		4	7297	683
		5	8043	620
		6	8789	548
		7	9535	470
6.3C	1250	1	5645	1025	Y100L2-4	3
		2	6478	978
		3	7311	920
		4	8144	850
		5	8977	772
		6	9809	684
		7	10642	585
6.3C	1600	1	7225	1679	Y132S-4	5.5
		2	8292	1602
		3	9358	1507
		4	10424	1393
		5	11490	1265
		6	12556	1120
		7	13622	958
6.3C	1800	1	8128	2125	Y132M-4	7.5
		2	9329	2028
		3	10528	1907
		4	11727	1763
		5	12926	1601
		6	14125	1418
		7	15325	1213
6.3C	2000	1	9032	2623	Y160M-4	11
		2	10365	2504
		3	11698	2355
		4	13030	2176
		5	14303	1978
		6	15698	1750
		7	16997	1497
8.C	1000	1	10688	1176	Y132S-4	5.5
		2	12128	1152
		3	13568	898
		4	14932	834
		5	16372	784
		6	17813	673
		7	19253	576
8.C	1120	1	11970	1262	Y132M-4	7.5
		2	13580	1195
		3	15200	1126
		4	16720	1046
		5	18340	948
		6	19850	844
		7	21560	722
8.C	1250	1	13359	1575	Y160M-4	11
		2	15160	1490
		3	16960	1405
		4	18665	1385
		5	20466	1305
		6	22066	1053
		7	24006	901
8.C	1400	1	14960	1972	Y160L-4	15
		2	16980	1869
		3	18990	1770
		4	20900	1635
		5	22920	1473
		6	24940	1320
		7	26950	1130
8.C	1600	1	17100	2580	Y160L-2	18.5
		2	19405	2443
		3	21709	2302
		4	23881	2138
		5	26196	1938
		6	28500	1725
		7	30804	1476
8.C	1800	1	19238	3285	Y200L-4	30
		2	21830	3110
		3	24422	2929
		4	26878	2720
		5	29470	2483
		6	32063	2193
		7	34655	1876
10.C	710	1	14620	776	Y132S-4	5.5
		2	16818	730
		3	18815	707
		4	20707	658
		5	22704	609
		6	24700	530
		7	26690	453
10.C	800	1	16699	1006	Y132M-4	7.5
		2	18960	953
		3	21200	898
		4	23332	834
		5	25465	755
		6	27632	673
		7	30083	576
10.C	900	1	18790	1276	Y160M-4	11
		2	21350	1208
		3	23850	1138
		4	26250	1057
		5	28750	957
		6	31310	852
		7	33840	730
10.C	1000	1	20874	1575	Y160L-4	15
		2	23681	1491
		3	26500	1405
		4	29165	1305
		5	31978	1163
		6	34790	1053
		7	37603	901
10.C	1120	1	23380	1975	Y180L-4	22
		2	26530	1870
		3	29680	1762
		4	32670	1637
		5	35820	1484
		6	38970	1320
		7	42120	1130
10.C	1250	1	26093	2468	Y200L-4	30
		2	29603	2332
		3	33125	2202
		4	36393	2045
		5	39972	1852
		6	43488	1649
		7	47004	1410
12.5C	630	1	25690	962	Y180L-6	15
		2	29140	930
		3	32610	876
		4	35680	811
		5	39150	736
		6	42810	654
		7	46270	560
12.5C	710	1	28947	1239	Y200L2-6	22
		2	32847	1174
		3	36748	1118
		4	40443	1027
		5	44344	931
		6	48040	827
		7	52145	709
12.5C	800	1	32620	1583	Y225M-6	30
		2	37010	1500
		3	41410	1412
		4	45570	1312
		5	49870	1182
		6	54360	1057
		7	58750	904
12.5C	900	1	36693	1996	Y250M-6	37
		2	41637	1890
		3	46582	1781
		4	51266	1654
		5	56210	1498
		6	61155	1334
		7	66099	1141
12.5C	1000	1	40770	2474	Y250M-4	55
		2	46260	2342
		3	51765	2208
		4	56960	2050
		5	62450	1855
		6	67950	1652
		7	73440	1412
12.5C	1120	1	45662	3103	Y280S-4	75
		2	51815	2938
		3	57969	2757
		4	63798	2570
		5	69651	2327
		6	75478	2072
		7	82257	1771

Original scan (reference)

← General-Purpose Centrifugal Fans

4-72 Centrifugal Ventilation Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
2.8A	2900	1	1310	966	Y90S-2	1.5
		2	1480	933
		3	1659	887
		4	1828	835
		5	2007	770
		6	2177	702
		7	2356	606
3.2A	2900	1	1955	1263	Y90L-2	2.2
		2	2209	1220
		3	2478	1160
		4	2729	1091
		5	2996	1006
		6	3250	918
		7	3517	792
3.6A	2900	1	3045	1531	Y100L-2	3
		2	3405	1481
		3	3786	1419
		4	4146	1343
		5	4516	1243
		6	4887	1144
		7	5268	989
3.6A	1450	1	1522	381	Y90S-4	1.1
		2	1703	368
		3	1893	353
		4	2073	335
		5	2263	313
		6	2444	285
		7	2634	247
4.A	2900	1	4506	1969	Y132S1-2	5.5
		2	4973	1915
		3	5468	1830
		4	5962	1723
		5	6457	1606
		6	6924	1459
		7	7419	1320
4.A	1450	1	2253	490	Y90S-4	1.1
		2	2487	478
		3	2734	455
		4	2981	429
		5	3215	405
		6	3462	363
		7	3700	329
4.5A	2900	1	6416	2497	Y132S2-2	7.5
		2	7081	2428
		3	7785	2320
		4	8489	2184
		5	9194	2036
		6	9859	1849
		7	10562	1673
4.5A	1450	1	3208	620	Y90S-4	1.1
		2	3540	608
		3	3893	577
		4	4245	543
		5	4597	506
		6	4929	455
		7	5281	416
5.A	2900	1	8855	3145	Y160M2-2	15
		2	9928	3015
		3	11054	2862
		4	12128	2702
		5	13202	2516
		6	14328	2335
		7	15455	2019
5.A	1450	1	4427	780	Y100L-4	2.2
		2	4964	762
		3	5527	736
		4	6064	693
		5	6628	637
		6	7164	580
		7	7728	502
5.6A	2900	1	12440	3945	Y180M-2	22
		2	13950	3856
		3	15530	3716
		4	17040	3500
		5	18620	3229
		6	20130	2929
		7	21710	2533
5.6A	1450	1	6220	986	Y112M-4	4
		2	6975	964
		3	7765	929
		4	8520	875
		5	9310	805
		6	10065	732
		7	10855	633
6.A	2900	1	15300	4496	Y200L1-2	30
		2	17150	4396
		3	19100	4238
		4	20960	3996
		5	22810	3696
		6	24760	3344
		7	26700	2896
6.A	1450	1	7650	1124	Y112M-4	4
		2	8578	1099
		3	9551	1059
		4	10478	999
		5	11452	919
		6	12379	836
		7	13353	724
6.A	960	1	5065	492	Y100L-6	1.5
		2	5696	481
		3	6324	463
		4	6938	437
		5	7582	402
		6	8196	368
		7	8841	317
5.C	1800	1	5500	1212	Y112M-2	4
		2	6160	1184
		3	6860	1141
		4	7530	1076
		5	8230	989
		6	8890	900
		7	9590	785
5.C	2000	1	6110	1496	Y132S1-2	5.5
		2	6850	1410
		3	7620	1410
		4	8360	1328
		5	9100	1218
		6	9880	1110
		7	10620	960
5.C	2240	1	6840	1867	Y132S2-2	7.5
		2	7670	1834
		3	8540	1767
		4	9370	1666
		5	10240	1527
		6	11070	1393
		7	11940	1205
5.C	2500	1	7630	2337	Y160M1-2	11
		2	8560	2290
		3	9530	2200
		4	10450	2075
		5	11430	1908
		6	12350	1735
		7	13320	1506
6.C	1250	1	6595	835	Y100L2-2	3
		2	7395	818
		3	8234	786
		4	9033	742
		5	9873	682
		6	10672	621
		7	11511	537
6.C	1600	1	8442	1370	Y132S-4	5.5
		2	9485	1339
		3	10539	1291
		4	11552	1217
		5	12616	1119
		6	13660	1019
		7	14704	881
6.C	1800	1	9497	1736	Y132M-4	7.5
		2	10643	1697
		3	11858	1636
		4	13008	1542
		5	14216	1418
		6	15367	1291
		7	16576	1116
6.C	2000	1	10552	2147	Y160M-4	11
		2	11831	2099
		3	13174	2022
		4	14453	1907
		5	15876	1753
		6	17075	1595
		7	18418	1378
6.C	2240	1	11818	2698	Y160L-4	15
		2	13251	2637
		3	14755	2541
		4	16187	2396
		5	17692	2202
		6	19124	2004
		7	20628	1733
7.C	1400	1	11730	1426	Y132M-4	7.5
		2	13150	1394
		3	14640	1344
		4	16060	1268
		5	17550	1166
		6	18980	1061
		7	20470	918
7.C	1600	1	13400	1863	Y160M-4	11
		2	15030	1825
		3	16730	1755
		4	18350	1656
		5	20070	1523
		6	21700	1387
		7	23390	1200
7.C	1800	1	15080	2360	Y160L-4	15
		2	16910	2308
		3	18820	2222
		4	20650	2096
		5	22560	1927
		6	24400	1754
		7	26320	1519
7.C	2000	1	16760	2910	Y180M-4	18.5
		2	18790	2845
		3	20920	2743
		4	22940	2589
		5	25090	2380
		6	27110	2165
		7	29240	1876
8.C	1120	1	12224	1209	Y132M-4 / Y160M-4	7.5 / 11
		2	14007	1193
		3	15705	1168
		4	17487	1124
		5	19185	1060
		6	20968	975
		7	22686	887
8.C	1250	1	13643	1500	Y160M-4	11
		2	15633	1487
		3	17527	1454
		4	19571	1401
		5	21412	1321
		6	23402	1218
		7	25297	1108
8.C	1400	1	15830	2032	Y180M-4	18.5
		2	18130	1960
		3	20330	1907
		4	22640	1888
		5	24840	1781
		6	27040	1638
		7	27150	1490
8.C	1600	1	17463	2478	Y180L-4 / Y200L-4	22 / 30
		2	20010	2445
		3	22435	2390
		4	24982	2303
		5	27408	2171
		6	29835	1988
		7	32380	1816
8.C	1800	1	19646	3143	Y200L-4 / Y225S-4	30 / 37
		2	22512	3077
		3	25240	3032
		4	28105	2920
		5	30844	2754
		6	33704	2531
		7	36427	2302
10.C	800	1	22312	967	Y160M-4	11
		2	24290	954
		3	26268	919
		4	27961	872
		5	29608	823
		6	31202	786
		7	33903	742
10.C	900	1	25101	1370	Y160L-4	15
		2	27328	1339
		3	29551	1295
		4	31457	1217
		5	33780	1117
		6	36134	1079
		7	36439	956
10.C	1000	1	27930	1736	Y180M-4	18.5
		2	30383	1697
		3	32835	1655
		4	35625	1563
		5	37010	1436
		6	39038	1291
		7	41502	1125

Original scan (reference)

← General-Purpose Centrifugal Fans

4-79 Centrifugal Ventilation Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.A	2900	1	2180	1167	Y90S-2	1.5
		2	2430	1157
		3	2670	1118
		4	2900	1059
		5	3130	1040
		6	3480	892
		7	3830	726
3.5A	2900	1	3460	1589	Y100L-2	3
		2	3860	1549
		3	4240	1510
		4	4630	1461
		5	4800	1422
		6	5520	1206
		7	6070	981
4.A	2900	1	5220	2079	Y132S1-2	5.5
		2	5780	2030
		3	6310	1981
		4	6880	1902
		5	7410	1833
		6	8240	1679
		7	9080	1275
4.5A	2900	1	7440	2628	Y160M1-2	11
		2	8200	2599
		3	8890	2511
		4	9790	2412
		5	10550	2344
		6	11720	2001
		7	12920	1618
4.5A	1450	1	3720	657	Y90L-4	1.5
		2	4110	647
		3	4510	628
		4	4890	598
		5	5270	559
		6	5580	500
		7	6450	402
5.A	2900	1	10200	3256	Y160M2-2	15
		2	11250	3217
		3	12350	3099
		4	13410	2981
		5	14480	2902
		6	16100	2471
		7	17720	2001
5.A	1450	1	5100	814	Y100L1-4	2.2
		2	5630	805
		3	6180	775
		4	6710	745
		5	7240	706
		6	8050	618
		7	8860	500
6.A	1450	1	8820	1177	Y132S-4	5.5
		2	9740	1157
		3	10700	1118
		4	11600	1069
		5	12520	1010
		6	13920	882
		7	15320	706
6.A	960	1	5840	520	Y100L-6	1.5
		2	6420	510
		3	7080	490
		4	7680	471
		5	8340	441
		6	9220	402
		7	10100	314
6.C	1250	1	7600	882	Y100L2-4	3
		2	8380	855
		3	9220	831
		4	10000	799
		5	10790	765
		6	12000	682
		7	13150	533
6.C	1600	1	9730	1444	Y132S-4	5.5
		2	10700	1417
		3	11800	1361
		4	12800	1308
		5	13900	1283
		6	15370	1117
		7	16830	872
6.C	1800	1	10950	1628	Y132M-4	7.5
		2	12070	1788
		3	13280	1723
		4	14380	1659
		5	15440	1586
		6	17290	1413
		7	18940	1104
6.C	2000	1	12170	2257	Y160M-4	11
		2	13370	2214
		3	14750	2127
		4	16000	2044
		5	17380	1957
		6	19210	1744
		7	21040	1363
6.C	2240	1	13630	2831	Y160L-4	15
		2	14980	2777
		3	16520	2688
		4	17920	2595
		5	19340	2455
		6	21510	2189
		7	23570	1710
7.C	1000	1	9660	755	Y112M-4	4
		2	10660	746
		3	11700	716
		4	12700	687
		5	13700	657
		6	15300	588
		7	16800	461
7.C	1120	1	10830	951	Y132S-4	5.5
		2	11950	932
		3	13100	902
		4	14200	863
		5	15350	843
		6	17200	726
		7	18800	569
7.C	1250	1	12120	1187	Y132M-4	7.5
		2	13340	1167
		3	14650	1128
		4	15850	1079
		5	17150	1049
		6	19160	902
		7	20850	716
7.C	1400	1	13570	1490	Y160M-4	11
		2	14900	1466
		3	16400	1416
		4	17750	1353
		5	19210	1315
		6	21460	1131
		7	23350	898
7.C	1600	1	15450	1942	Y160L-4	15
		2	17100	1912
		3	18750	1844
		4	20300	1765
		5	21950	1716
		6	24500	1481
		7	26850	1167
7.C	1800	1	17400	2461	Y180L-4	22
		2	19200	2422
		3	21100	2334
		4	22860	2236
		5	24700	2177
		6	27600	1873
		7	30200	1481
8.C	900	1	13500	775	Y132S-4	5.5
		2	14900	768
		3	16650	735
		4	17800	706
		5	19250	686
		6	21400	598
		7	23500	471
8.C	1000	1	15000	961	Y132M-4	7.5
		2	16550	951
		3	18500	917
		4	19750	873
		5	21400	853
		6	23800	738
		7	26050	579
8.C	1120	1	16800	1208	Y160M-4	11
		2	18550	1186
		3	20400	1147
		4	22100	1098
		5	23900	1069
		6	26700	922
		7	29200	736
8.C	1250	1	19100	1549	Y160L-4	15
		2	21050	1530
		3	23200	1471
		4	25100	1412
		5	27100	1373
		6	30200	1177
		7	33100	932
8.C	1400	1	21000	1877	Y180M-4	18.5
		2	23190	1834
		3	25650	1787
		4	27650	1712
		5	29830	1667
		6	33340	1434
		7	36490	1134
8.C	1600	1	24000	2452	Y200L-4	30
		2	26500	2420
		3	29200	2334
		4	31600	2228
		5	34200	2177
		6	38100	1873
		7	41700	1481
8.C	1800	1	27000	3103	Y225S-4	37
		2	29810	3068
		3	32850	2954
		4	35500	2862
		5	39460	2758
		6	42860	2371
		7	46910	1874
10.E	830	1	24550	1059	Y160L-4	15
		2	28300	1040
		3	31860	971
		4	35900	902
		5	38100	814
		6	40750	726
10.E	940	1	27850	1363	Y180M-4	18.5
		2	32050	1334
		3	36100	1255
		4	40300	1167
		5	43200	1049
		6	45900	932
10.E	1000	1	29600	1540	Y180L-4	22
		2	34100	1510
		3	38400	1412
		4	42900	1314
		5	45900	1177
		6	48900	1049
10.E	1170	1	34600	2118	Y225S-4	37
		2	39000	2079
		3	45000	1947
		4	50300	1804
		5	53700	1618
		6	57100	1442
10.E	1300	1	38500	2609	Y250M-4	55
		2	44300	2560
		3	50000	2393
		4	55800	2226
		5	59700	2001
		6	63500	1779
12.E	740	1	37900	1216	Y200L2-6	22
		2	41900	1198
		3	49200	1108
		4	54800	1040
		5	58700	932
		6	62400	824
12.E	830	1	42500	1530	Y250M-6	37
		2	48900	1500
		3	55200	1402
		4	61500	1317
		5	65900	1167
		6	70100	1040
12.E	940	1	48200	1952	Y250M-6	55
		2	55400	1922
		3	62400	1795
		4	69600	1677
		5	74600	1491
		6	79300	1334
12.E	1040	1	53300	2393	Y280S-4	75
		2	61300	2354
		3	69400	2197
		4	77100	2083
		5	82600	1834
		6	87200	1628

Original scan (reference)

← General-Purpose Centrifugal Fans

5-90 Centrifugal Ventilation Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.6C	2000	1	3940	972	Y90L-2	2.2
		2	4590	916
		3	5250	867
		4	5900	794
		5	6560	728
		6	7230	673
		7	7880	549
3.6C	2240	1	4410	1219	Y100L-2	3
		2	5140	1149
		3	5880	1088
		4	6610	998
		5	7350	913
		6	8090	845
		7	8820	731
3.6C	2500	1	4920	1519	Y112M-2	4
		2	5730	1432
		3	6560	1355
		4	7380	1243
		5	8200	1138
		6	9030	1052
		7	9840	911
3.6C	2800	1	5510	1905	Y132S1-2	5.5
		2	6420	1795
		3	7350	1700
		4	8260	1559
		5	9190	1427
		6	10120	1320
		7	11030	1142
4.C	1800	1	4860	972	Y100L-2	3
		2	5670	916
		3	6480	867
		4	7290	794
		5	8100	728
		6	8910	673
		7	9720	549
4.C	2000	1	5400	1200	Y112M-2	4
		2	6300	1131
		3	7200	1070
		4	8100	980
		5	9000	900
		6	9900	831
		7	10800	720
4.C	2240	1	6050	1505	Y132S1-2	5.5
		2	7060	1419
		3	8060	1343
		4	9070	1229
		5	10080	1126
		6	11090	1043
		7	12100	904
4.C	2500	1	6750	1890	Y132S2-2	7.5
		2	7880	1778
		3	9000	1672
		4	10130	1542
		5	11250	1413
		6	12380	1303
		7	13500	1125
4.5C	1400	1	5380	744	Y100L-2	3
		2	6270	701
		3	7180	664
		4	8080	608
		5	8980	558
		6	9870	515
		7	10770	446
4.5C	1600	1	6150	972	Y112M-2	4
		2	7180	916
		3	8200	867
		4	9230	793
		5	10250	728
		6	11280	672
		7	12310	583
4.5C	1800	1	6920	1230	Y132S1-2	5.5
		2	8080	1189
		3	9230	1097
		4	10380	1004
		5	11530	921
		6	12690	852
		7	13850	738
4.5C	2000	1	7690	1519	Y132S2-2	7.5
		2	8980	1411
		3	10250	1355
		4	11540	1239
		5	12810	1138
		6	14100	1052
		7	15390	911
4.5C	2240	1	8610	1905	Y160M1-2	11
		2	10050	1796
		3	11480	1699
		4	12920	1554
		5	14350	1427
		6	15800	1319
		7	17230	1143
5.C	1250	1	6590	732	Y100L2-4	3
		2	7690	693
		3	8790	663
		4	9890	620
		5	10980	571
		6	12080	519
		7	12090	440
5.C	1400	1	7380	919	Y112M-4	4
		2	8610	866
		3	9850	819
		4	11080	750
		5	12300	689
		6	13540	636
		7	14780	552
5.C	1600	1	8430	1200	Y132S-4	5.5
		2	9840	1135
		3	11260	1069
		4	12660	980
		5	14060	900
		6	15470	831
		7	16890	720
5.C	1800	1	9480	1519	Y132M-4	7.5
		2	11070	1436
		3	12660	1353
		4	14240	1240
		5	15830	1139
		6	17410	1051
		7	19000	912
5.C	2000	1	10540	1875	Y160M-4	11
		2	12300	1773
		3	14070	1672
		4	15820	1530
		5	17570	1406
		6	19340	1300
		7	23350	1126
5.6C	1120	1	8300	738	Y112M-4	4
		2	9680	695
		3	11070	657
		4	12440	610
		5	13830	553
		6	14730	511
		7	16600	443
5.6C	1250	1	9260	919	Y132S-4	5.5
		2	10800	866
		3	12350	819
		4	13890	750
		5	15440	689
		6	16920	638
		7	18530	552
5.6C	1400	1	10370	1152	Y132M-4	7.5
		2	12100	1088
		3	13830	1027
		4	15550	941
		5	17190	864
		6	18410	798
		7	20140	687
5.6C	1600	1	11860	1505	Y160M-4	11
		2	13820	1418
		3	15810	1341
		4	17780	1229
		5	19750	1108
		6	21040	1042
		7	23710	904
5.6C	1800	1	13340	1905	Y160L-4	15
		2	15600	1795
		3	17780	1698
		4	20000	1556
		5	22230	1413
		6	23670	1319
		7	26220	1144
6.C	1000	1	9110	676	Y112M-4	4
		2	10630	638
		3	12150	600
		4	13670	551
		5	15190	506
		6	16710	447
		7	18230	405
6.C	1120	1	10200	847	Y132S-4	5.5
		2	11910	820
		3	13610	779
		4	15310	725
		5	17010	635
		6	18720	586
		7	20430	547
6.C	1250	1	11390	1055	Y132M-4	7.5
		2	13290	994
		3	15190	941
		4	17090	861
		5	18990	777
		6	20210	707
		7	22790	633
6.C	1400	1	12750	1323	Y160M-4	11
		2	14870	1247
		3	17030	1192
		4	19140	1080
		5	21250	992
		6	23360	915
		7	25520	794
6.C	1600	1	14580	1728	Y160L-4	15
		2	17010	1628
		3	19440	1541
		4	21870	1410
		5	24300	1296
		6	26740	1196
		7	29170	1037
6.3C	1000	1	10550	744	Y112M-4	4
		2	12310	701
		3	14070	664
		4	15820	608
		5	17580	551
		6	19340	515
		7	21100	447
6.3C	1100	1	11610	900	Y132S-4	5.5
		2	13540	848
		3	15480	810
		4	17400	736
		5	19340	675
		6	21270	623
		7	23200	540
6.3C	1200	1	12670	1072	Y132M-4	7.5
		2	14770	1010
		3	16880	966
		4	18990	875
		5	21110	804
		6	23210	741
		7	25320	644
6.3C	1300	1	13720	1258	Y160M-4	11
		2	16000	1193
		3	18300	1122
		4	20570	1027
		5	22850	943
		6	25140	870
		7	26030	773
6.3C	1400	1	14780	1459	Y160L-4	15
		2	17240	1374
		3	19710	1302
		4	22150	1191
		5	24610	1099
		6	27090	1009
		7	29540	876
7.1C	900	1	13590	765	Y132S-4	5.5
		2	15860	721
		3	18120	683
		4	20390	625
		5	22650	574
		6	24910	530
		7	27180	469
7.1C	1000	1	15100	945	Y132M-4	7.5
		2	17620	910
		3	20130	843
		4	22650	772
		5	25160	708
		6	27680	620
		7	30200	567
7.1C	1100	1	16610	1143	Y160M-4	11
		2	19380	1077
		3	22150	994
		4	24920	934
		5	27690	858
		6	30420	770
7.1C	1200	1	18120	1361	Y160L-4	15
		2	21150	1282
		3	24180	1215
		4	27180	1112
		5	30210	1019
		6	33210	943
		7	36240	817
7.1C	1300	1	19630	1598	Y180M-4	18.5
		2	22910	1506
		3	26160	1426
		4	29450	1304
		5	32730	1196
		6	35980	1076
		7	39260	959
8.C	800	1	17280	768	Y160M-6	7.5
		2	20160	723
		3	23040	669
		4	25920	627
		5	28800	578
		6	31680	531
		7	34560	461
8.C	900	1	19440	972	Y160L-6	11
		2	22680	915
		3	25920	867
		4	29160	794
		5	32400	720
		6	35640	672
		7	38890	583
8.C	1000	1	21600	1200	Y180L-4	15
		2	25200	1130
		3	28800	1070
		4	32400	980
		5	36000	900
		6	39600	830
		7	43200	720
8.C	1050	1	22680	1323	Y180M-4	18.5
		2	26460	1248
		3	30240	1180
		4	34020	1080
		5	37800	992
		6	41580	915
		7	45360	794
8.C	1100	1	23760	1456	Y180L-4	22
		2	27730	1295
		3	31680	1228
		4	35640	1188
		5	39500	1089
		6	43580	1004
		7	47520	871
9.C	710	1	21830	765	Y160L-6	11
		2	25470	721
		3	29110	683
		4	32750	625
		5	36390	574
		6	40030	529
		7	43670	459
9.C	800	1	24600	972	Y180L-6	15
		2	28700	915
		3	32800	867
		4	36900	794
		5	41000	720
		6	45100	672
		7	49210	583
9.C	900	1	27680	1230	Y200L1-6	18.5
		2	32290	1168
		3	36900	1097
		4	41520	1004
		5	46130	923
		6	50770	851
		7	55360	738
9.C	1000	1	30750	1518	Y200L2-6	22
		2	35580	1430
		3	41000	1354
		4	46130	1240
		5	51280	1133
		6	56380	1050
		7	61510	911
10.C	630	1	26580	744	Y180L-6	15
		2	31010	707
		3	35440	654
		4	39870	607
		5	44300	558
		6	48730	515
		7	53160	448
10.C	710	1	29950	945	Y200L1-6	18.5
		2	34940	890
		3	39940	843
		4	44930	772
		5	49930	709
		6	54920	654
		7	59910	567
10.C	800	1	33750	1200	Y200L2-6	22
		2	39400	1130
		3	45000	1070
		4	50630	980
		5	56250	900
		6	61880	830
		7	67500	720
10.C	900	1	37970	1519	Y250M-6	30
		2	44300	1450
		3	50630	1354
		4	56960	1240
		5	63290	1139
		6	69620	1050
		7	75940	911
11.2C	630	1	37340	933	Y200L2-6	22
		2	43560	879
		3	49790	833
		4	56010	762
		5	62240	700
		6	68460	646
		7	74680	561
11.2C	700	1	41490	1162	Y250M-6	30
		2	48410	1085
		3	55320	1028
		4	62230	941
		5	69150	857
		6	76070	787
		7	82980	692
11.2C	800	1	47420	1505	Y250M-4	37
		2	55320	1417
		3	63220	1343
		4	71120	1229
		5	79030	1124
		6	86940	1041
		7	94850	897

Original scan (reference)

High-Pressure Centrifugal Fans

9-19 / 9-26 / 10-16, etc.

Product Introduction

Chantong's high-pressure centrifugal fans include the 8-09, 9-12, 9-19, 9-20, 9-26, 9-28, 10-16 and 10-24 models.

Primary Uses

Widely used in smelting / cupola furnaces, incinerators, boilers, electroplating, aquaculture, environmental protection and ceramic kilns wherever high-pressure air supply, combustion forcing, rapid air production, glass tempering or powder separation is required.

Operating Conditions

Conveyed medium: air or other non-flammable, non-explosive gases that are non-corrosive to steel and free of sticky substances. Mixture dust content ≤150 mg/m³, medium temperature ≤80°C, relative humidity ≤90%.

Model Series

8-09 High-Pressure Centrifugal Fan 9-12 High-Pressure Centrifugal Fan 9-19 High-Pressure Centrifugal Fan 9-20 High-Pressure Centrifugal Fan 9-26 High-Pressure Centrifugal Fan 9-28 High-Pressure Centrifugal Fan 10-16 High-Pressure Centrifugal Fan 10-24 High-Pressure Centrifugal Fan

Product Images by Model

← High-Pressure Centrifugal Fans

8-09 High-Pressure Centrifugal Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.6A	2900	1	100	2849	Y801-2	0.75
		2	140	3050
		3	180	3180
		4	220	3226
		5	260	3179
		6	300	3100
		7	340	2980
4.A	2900	1	137	3649	Y802-2	1.1
		2	192	3813
		3	247	3926
		4	302	3904
		5	357	3805
		6	412	3627
		7	467	3679
5.A	2900	1	268	5689	Y100L-2	3
		2	375	5935
		3	482	6134
		4	589	6260
		5	670	6132
		6	804	5980
		7	911	5748
6.3A	2900	1	537	9032	Y132S1-2 / Y132S2-2	5.5 / 7.5
		2	751	9464
		3	966	9740
		4	1181	9620
		5	1395	9735
		6	1619	9500
		7	1825	9129
7.1A	2900	1	768	11472	Y160L-2 / Y160M1-2	15 / 18.5
		2	1075	12020
		3	1383	12371
		4	1690	12471
		5	1997	12364
		6	2304	12061
		7	2312	11594
8.A	2900	1	1110	14867	Y160M2-2 / Y180M-2 / Y200L1-2	15 / 18.5 / 22 / 30
		2	1554	15579
		3	1999	16033
		4	2442	16163
		5	2887	16023
		6	3331	15632
		7	3775	15200

Original scan (reference)

← High-Pressure Centrifugal Fans

9-12 High-Pressure Centrifugal Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.6A	2900	1	270	3174	Y802-2	1.1
		2	346	3255
		3	383	3292
		4	422	3310
		5	496	3348
		6	575	3325
		7	650	3275
4.A	2900	1	370	3918	Y90S-2	1.5
		2	475	4018
		3	535	4055
		4	580	4093
		5	665	4133
		6	788	4105
		7	890	4043
5.A	2900	1	724	6123	Y100L-2 / Y112M-2	3 / 4
		2	928	6328
		3	1047	6350
		4	1132	6338
		5	1336	6459
		6	1540	6410
		7	1742	6317
6.3A	2900	1	1450	9720	Y160M1-2 / Y160M2-2	11 / 15
		2	1857	9968
		3	2083	10063
		4	2265	10153
		5	2673	10245
		6	3080	10194
		7	3486	10030
7.1A	2900	1	2074	12347	Y180M-2 / Y200L1-2	22 / 30
		2	2658	12620
		3	3000	12807
		4	3242	12996
		5	3826	13024
		6	4411	12935
		7	4990	12739
8.A	2900	1	2632	15698	Y200L1-2 / Y200L2-2 / Y225M-2	30 / 37 / 45
		2	3275	16070
		3	4117	16511
		4	4858	16536
		5	5800	16429
		6	6340	16172
		7	7080	15740

Original scan (reference)

← High-Pressure Centrifugal Fans

9-19 High-Pressure Centrifugal Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
4.A	2900	1	834	3584	Y90L-2 / Y100L-2	2.2 / 3
		2	980	3654
		3	1126	3647
		4	1274	3597
		5	1420	3507
		6	1568	3384
		7	1714	3253
5.A	2900	1	1420	5697	Y132S2-2 / Y160M1-2	7.5 / 11
		2	1942	5792
		3	2264	5740
		4	2586	5630
		5	2854	5515
		6	3176	5323
		7	3498	5119
6.3A	2900	1	3230	9149	Y160L-2 / Y180M-2 / Y200L1-2	18.5 / 22 / 30
		2	3875	9219
		3	4519	9219
		4	5163	9055
		5	5700	8887
		6	6343	8543
		7	6987	8222
8.D	2900	1	6604	16374	Y280S-2 / Y280M-2	75 / 90
		2	7941	15229
		3	9333	15157
		4	10060	14877
		5	11669	14546
		6	12979	14021
		7	14298	13354
14.D	1450	1	17680	11669	Y315M-4 / Y315M2-4 / Y355M1-4	132 / 160 / 220
		2	21830	11974
		3	25926	11770
		4	30050	11464
		5	34173	10967
		6	38209	10457
		7	42419	9878

Original scan (reference)

← High-Pressure Centrifugal Fans

9-20 High-Pressure Centrifugal Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
4.A	2900	1	830	3684	Y90L-2 / Y100L-2	2.2 / 3
		2	970	3773
		3	1110	3792
		4	1250	3714
		5	1390	3606
		6	1530	3469
		7	1670	3302
5.A	2900	1	1615	5762	Y132S1-2 / Y132S2-2	5.5 / 7.5
		2	1880	5829
		3	2180	5760
		4	2430	5720
		5	2740	5672
		6	2970	5439
		7	3280	5154
6.A	2900	1	3120	8643	Y160M2-2 / Y160L-2 / Y180M-2	15 / 18.5 / 22
		2	3650	8547
		3	4180	8434
		4	4710	8350
		5	5245	8277
		6	5775	8467
		7	6305	8198
7.D	2900	1	4960	11760	Y200L1-2 / Y200L2-2 / Y225M-2	30 / 37 / 45
		2	5830	12139
		3	6650	12171
		4	7500	12063
		5	8350	11839
		6	9180	11514
		7	10020	11093
10.D	1450	1	7235	5997	Y180M-4 / Y180L-4 / Y200L-4 / Y225S-4	18.5 / 22 / 30 / 37
		2	8460	6114
		3	9870	6203
		4	10925	6154
		5	12150	6048
		6	13375	5880
		7	14600	5634

Original scan (reference)

← High-Pressure Centrifugal Fans

9-26 High-Pressure Centrifugal Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
4.A	2900	1	2198	3852	Y132S1-2	5.5
		2	2369	3820
		3	2538	3765
		4	2706	3684
		5	2877	3607
		6	3044	3502
		7	3215	3407
5.A	2900	1	4293	6035	Y160M2-2 / Y160L-2	15 / 18.5
		2	4706	5934
		3	5114	5869
		4	5527	5725
		5	5939	5567
		6	6348	5381
		7	6761	5186
6.3A	2900	1	8588	9608	Y225M-4 / Y250M-2	45 / 55
		2	9415	9616
		3	10230	9429
		4	11099	9229
		5	11883	8915
		6	12899	8630
		7	13525	8310
8.D	2900	1	17584	15955	Y315M1-2 / Y315M2-2 / Y315L-2	132 / 160 / 200
		2	21061	16084
		3	25947	15814
		4	26378	14663
		5	28774	14171
		6	32972	13618
		7	37656	12960
14.D	1450	1	47121	12285	Y355M3-4 / Y315M2-4 / JS-138-4	250 / 315 / 410
		2	53071	12391
		3	14643	12078
		4	61929	11776
		5	15328	11776
		6	70682	11099
		7	76672	10589

Original scan (reference)

← High-Pressure Centrifugal Fans

9-28 High-Pressure Centrifugal Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
4.A	2900	1	2473	3684	Y112M-2 / Y132S1-2 / Y132S2-2	4 / 5.5 / 7.5
		2	2748	3835
		3	3022	3778
		4	3297	3707
		5	3572	3623
		6	3847	3540
		7	4122	3438
5.A	2900	1	4830	6071	Y160M2-2 / Y160L-2	15 / 18.5
		2	5307	6002
		3	5903	5994
		4	6440	5796
		5	6977	5667
		6	7513	5531
		7	8050	5394
6.3A	2900	1	9662	9610	Y225M-2 / Y250M-2 / Y280S-2	45 / 55 / 75
		2	10735	9523
		3	11809	9358
		4	12882	9208
		5	13956	8990
		6	15029	8797
		7	16103	8551
8.D	2900	1	19783	15554	Y315M-2 / Y315M2-2 / Y355M-2	132 / 160 / 200
		2	21891	15329
		3	24180	15093
		4	26378	14843
		5	28575	14212
		6	30774	14171
		7	32972	13818
16.D	1450	1	79133	15554	Y450-4 / Y500-4	550 / 800
		2	92091	13838
		3	96713	15093
		4	105511	14648
		5	114309	14111
		6	123107	14401
		7	131868	13810

Original scan (reference)

← High-Pressure Centrifugal Fans

10-16 High-Pressure Centrifugal Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.6A	2900	1	490	3462	Y802-2 / Y90S-2	1.1 / 1.5
		2	680	3563
		3	680	3631
		4	760	3657
		5	840	3652
		6	930	3611
		7	1020	3536
4.A	2900	1	670	4276	Y90S-2 / Y90L-2	1.5 / 2.2
		2	790	4308
		3	910	4452
		4	1040	4455
		5	1160	4508
		6	1280	4458
		7	1400	4365
5.A	2900	1	1300	6680	Y132S1-2 / Y132S2-2	5.5 / 7.5
		2	1540	6872
		3	1780	7004
		4	2020	7072
		5	2260	7044
		6	2500	6966
		7	2740	6821
6.3A	2900	1	2610	10600	Y180M-2 / Y200L1-2 / Y200L2-2	22 / 30 / 37
		2	3090	10970
		3	3570	11170
		4	4050	11200
		5	4530	11150
		6	5010	11060
		7	5490	10900
8.D	2900	1	6755	17100	Y250M-2 / Y280S-2 / Y280M-2	55 / 75 / 90
		2	7980	17590
		3	9240	17930
		4	10490	18000
		5	11730	18030
		6	12980	17833
		7	14220	17460

Original scan (reference)

← High-Pressure Centrifugal Fans

10-24 High-Pressure Centrifugal Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.6A	2900	1	1040	3337	Y90L-2 / Y100L-2	2.2 / 3
		2	1240	3423
		3	1430	3485
		4	1630	3623
		5	1820	3529
		6	2020	3475
		7	2220	3396
4.A	2900	1	1430	4220	Y112M-2 / Y132S1-2	4 / 5.5
		2	1700	4274
		3	1970	4302
		4	2240	4350
		5	2505	4306
		6	2635	4290
		7	3040	4179
5.A	2900	1	2790	6437	Y160M1-2 / Y160L1-2 / Y160L-2	11 / 15 / 18.5
		2	3220	6600
		3	3840	6722
		4	4370	6798
		5	4900	6796
		6	5410	6703
		7	5940	6551
6.3A	2900	1	5590	10220	Y200L1-2 / Y200L2-2 / Y225M-2 / Y250M-2	30 / 37 / 45 / 55
		2	6640	10483
		3	7530	10672
		4	8730	10790
		5	9780	10770
		6	10830	10642
		7	11880	10424
8.D	2900	1	8000	16987	Y280S-2 / Y280M-2 / Y315S-2	75 / 90 / 110
		2	9500	17315
		3	11000	17683
		4	12500	17810
		5	14000	17645
		6	15500	17445
		7	17000	17222

Original scan (reference)

Boiler Forced / Induced Draft Fans

G(Y)4-73 / Y5-47, etc.

Product Introduction

Chantong's boiler fans include the G(Y)4-73, Y5-47, Y5-48, Y6-25, Y6-30, Y8-39, Y9-38 and GG/GY 2–6 t/h models.

Primary Uses

Widely used as forced / induced draft fans for industrial and civil boilers from 1 t/h to 500 t/h, as well as for hot-blast stoves, conversion furnaces, drying ovens, baking furnaces and rotary kilns.

Operating Conditions

Conveyed medium: air or other non-flammable, non-explosive gases that are non-corrosive to steel and free of sticky substances. Induced-draft fans handle flue gas at temperatures up to 250°C.

Model Series

G(Y)4-73 Boiler Fan Y5-47 Boiler Induced-Draft Fan Y5-48 Y6-25 Induced-Draft Fan Y6-30 Induced-Draft Fan Y8-39 Induced-Draft Fan Y9-38 Boiler Induced-Draft Fan GG/GY 2–6 t/h Boiler Fan

Product Images by Model

← Boiler Forced / Induced Draft Fans

G(Y)4-73 Boiler Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
8.D	1450	1	18244	2095	Y180M-4	18.5
		2	20442	2032
		3	22530	2018
		4	24618	1924
		5	26706	1794
		6	28904	1611
		7	30993	1400
9.D	1450	1	25976	2656	Y200L-4 / Y225S-4	30 / 37
		2	29106	2624
		3	32079	2559
		4	35052	2440
		5	38026	2212
		6	41155	2042
		7	44128	1775
10.D	1450	1	35633	3287	Y250M-4	55
		2	39926	3251
		3	44004	3198
		4	48063	3160
		5	52181	2813
		6	56455	2525
		7	60533	2194
11.D	1450	1	47427	3986	Y280S-4 / Y280M-4	75 / 90
		2	53142	3943
		3	58570	3840
		4	63998	3640
		5	69427	3411
		6	75141	3060
		7	80570	2685
12.D	1450	1	61574	4756	Y315M1-4 / Y315M2-4	132 / 160
		2	68992	4706
		3	76040	4602
		4	83088	4368
		5	90135	4089
		6	97554	3650
		7	104600	3171
14.D	1450	1	97777	6513	Y355M2-4 / Y355M3-4	250 / 315
		2	109650	6442
		3	120740	6272
		4	131940	5975
		5	143130	5588
		6	154910	4990
		7	166100	4333

Original scan (reference)

← Boiler Forced / Induced Draft Fans

Y5-47 Boiler Induced-Draft Fan

Performance Specifications

Test conditions: Pa=101325, t=200°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.15C	2900	1	1370	883	Y802-2	1.1
		2	1522	863
		3	1674	843
		4	1840	799
		5	1992	736
		6	2144	657
		7	2297	608
4.C	2900	1	2720	1433	Y100L-2	3
		2	3022	1432
		3	3325	1432
		4	3654	1383
		5	3988	1324
		6	4259	1200
		7	4561	1079
5.C	2620	1	4800	1883	Y132S1-2	5.5
		2	5333	1864
		3	5867	1824
		4	6448	1775
		5	6962	1667
		6	7515	1540
		7	8039	1410
6.C	2900	1	10200	3145	Y160L-2	18.5
		2	11300	3116
		3	12390	3007
		4	13480	2851
		5	14570	2606
		6	15670	2469
		7	16760	2146
7.C	2200	1	11162	2716	Y180M-4	18.5
		2	12833	2626
		3	13517	2618
		4	14858	2580
		5	16065	2432
		6	17316	2226
		7	18545	1991
11.D	1450	1	47427	2463	Y250M-4 / Y280S-4	55 / 75
		2	53142	2428
		3	58570	2373
		4	63998	2283
		5	69427	2109
		6	75141	1893
		7	80570	1659

Original scan (reference)

← Boiler Forced / Induced Draft Fans

Y5-48

Performance Specifications

Test conditions: Pa=101325, t=200°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
4.C	2500	1	2065	1097	Y90L-2	2.2
		2	2376	1113
		3	2681	1073
		4	2996	1022
		5	3300	946
		6	3622	853
		7	3918	742
5.C	2240	1	3772	1419	Y112M-2	4
		2	4311	1400
		3	4850	1377
		4	5389	1305
		5	5928	1214
		6	6466	1099
		7	7005	964
6.3C	2000	1	6737	1798	Y132S2-2	7.5
		2	7514	1781
		3	8862	1745
		4	9624	1654
		5	10487	1546
		6	11549	1388
		7	12511	1221
8.C	1600	1	11035	2118	Y160L-4	15
		2	12612	2096
		3	14189	2055
		4	15765	1948
		5	17342	1809
		6	18918	1635
		7	20495	1438
10.C	1250	1	15451	2145	Y180L-4	22
		2	18042	2123
		3	20633	2069
		4	23223	1964
		5	25814	1816
		6	28405	1647
		7	30995	1419
12.5C	1000	1	24143	2145	Y225S-4	37
		2	28191	2123
		3	32239	2060
		4	36287	1964
		5	40335	1837
		6	44383	1647
		7	48431	1419

Original scan (reference)

← Boiler Forced / Induced Draft Fans

Y6-25 Induced-Draft Fan

Performance Specifications

Test conditions: Pa=101325, t=200°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
6.C	2200	1	2400	2236	Y100L-2 / Y112M-2	3 / 4
		2	2723	2228
		3	3044	2215
		4	3370	2181
		5	3690	2108
		6	4010	1932
		7	4330	1581
6.C	2500	1	2730	2887	Y112M-2 / Y132S1-2	4 / 5.5
		2	3093	2867
		3	3490	2824
		4	3830	2720
		5	4200	2594
		6	4590	2408
		7	4920	2178
6.C	2800	1	3057	3601	Y132S1-2 / Y132S2-2	5.5 / 7.5
		2	3485	3585
		3	3874	3504
		4	4289	3542
		5	4587	3258
		6	5106	3003
		7	5500	2589
7.7C	1800	1	4270	2509	Y132S-4 / Y132M-4	5.5 / 7.5
		2	4830	2503
		3	5410	2500
		4	5990	2550
		5	6580	2225
		6	7130	1991
		7	7700	1891
7.7C	2000	1	4744	3208	Y132M-4 / Y160M-4	7.5 / 11
		2	5377	3270
		3	6010	3270
		4	6655	3148
		5	7286	2869
		6	7820	2420
		7	8539	2230
8.8C	1600	1	5730	2538	Y132M-4 / Y160M-4	7.5 / 11
		2	6428	2536
		3	6994	2536
		4	7733	2490
		5	8498	2380
		6	9205	2071
		7	9940	1913
8.8C	1800	1	6444	3212	Y160M-4 / Y160L-4	11 / 15
		2	7025	3273
		3	7857	3273
		4	8685	3206
		5	9526	3030
		6	10355	2730
		7	11082	2420
9.8C	1800	1	8900	3984	Y180M-4 / Y200L-4	18.5 / 30
		2	10850	4080
		3	12015	3858
		4	13159	3760
		5	14300	3462
		6	15445	3003

Original scan (reference)

← Boiler Forced / Induced Draft Fans

Y6-30 Induced-Draft Fan

Performance Specifications

Test conditions: Pa=101325, t=200°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.5C	2350	1	655	853	Y801-2	0.75
		2	745	843
		3	834	834
		4	923	824
		5	1000	800
		6	1103	765
		7	1192	727
4.3C	2260	1	1169	1306	Y90S-2	1.5
		2	1246	1265
		3	1487	1176
		4	1700	1170
		5	1806	1108
		6	1966	1078
		7	2125	1020
4.8C	2250	1	1619	1490	Y90L-2	2.2
		2	1840	1470
		3	2069	1450
		4	2300	1420
		5	2502	1390
		6	2723	1333
		7	2944	1265
5.4C	2300	1	2202	2157	Y100L-2	3
		2	2603	2128
		3	2804	2098
		4	3100	2060
		5	3406	1981
		6	3705	1922
		7	3963	1833
6.5C	2150	1	2926	2383	Y112M-2 / Y132S1-2	4 / 5.5
		2	3325	2323
		3	3730	2257
		4	4000	2288
		5	4263	2206
		6	4404	2137
		7	4945	2020
7.5C	1800	1	5000	2736	Y132M-4 / Y160M-4	7.5 / 11
		2	5522	2726
		3	5900	2716
		4	6200	2530
		5	6500	2530
		6	7000	2530
		7	7800	2432
7.5C	1900	1	5216	2598	Y132M-4 / Y160M-4	7.5 / 11
		2	5926	2550
		3	6622	2530
		4	7023	2448
		5	7349	2392
		6	7693	2324
		7	8060	2300
8.6C	1850	1	9494	3226	Y180M-4 / Y180L-4	18.5 / 22
		2	10789	3187
		3	12083	3138
		4	13776	3069
		5	14009	3040
		6	15303	2872
		7	17262	2736
8.6C	1950	1	11405	3605	Y180L-4 / Y200L-4	22 / 30
		2	12773	3500
		3	14806	3500
		4	15862	3226
		5	16880	3226
		6	18248	3056

Original scan (reference)

← Boiler Forced / Induced Draft Fans

Y8-39 Induced-Draft Fan

Performance Specifications

Test conditions: Pa=101325, t=200°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
4.D	2900	1	3242	2039	Y112M-2 / Y132S2-2	4 / 7.5
		2	3846	2049
		3	4451	2030
		4	5055	1991
		5	5660	1882
		6	6300	1868
		7	6765	1708
4.5D	2900	1	4610	2579	Y132S2-2 / Y160M1-2	7.5 / 11
		2	5470	2589
		3	6330	2569
		4	7200	2490
		5	8060	2390
		6	8980	2355
		7	9775	2180
5.D	2900	1	6330	3188	Y160M1-2 / Y160L-2 / Y180M-2	11 / 15 / 22
		2	7810	3192
		3	8600	3187
		4	9870	3079
		5	11050	2929
		6	12330	2920
		7	13410	2670
6.3D	1450	1	6333	1265	Y132S-4 / Y132M-4 / Y160M-4	5.5 / 7.5 / 11
		2	7514	1265
		3	8695	1225
		4	9876	1211
		5	11057	1167
		6	12338	1118
		7	13419	1060
8.D	1450	1	12969	2088	Y180M-4 / Y180L-4 / Y200L-4	18.5 / 22 / 30
		2	15387	2147
		3	17805	2098
		4	20223	2039
		5	22641	1951
		6	25059	1833
		7	27477	1696
9.D	1450	1	18465	2674	Y200L-4 / Y225M-4	30 / 45
		2	21908	2716
		3	23351	2657
		4	26794	2579
		5	32237	2471
		6	35679	2324
		7	39122	2147
11.2D	1450	1	35587	4099	Y280M-4 / Y315L1-4 / Y315M1-4	90 / 110 / 132
		2	42857	4275
		3	48857	4295
		4	55492	4197
		5	62127	4079
		6	68762	3803
		7	75397	3667

Original scan (reference)

← Boiler Forced / Induced Draft Fans

Y9-38 Boiler Induced-Draft Fan

Performance Specifications

Test conditions: Pa=101325, t=200°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
4.D	2900	1	3297	2275	Y132S1-2 / Y132S2-2 / Y160M1-2	5.5 / 7.5 / 11
		2	3846	2334
		3	4396	2334
		4	4945	2281
		5	5495	2226
		6	6045	2118
		7	6594	2170
4.5D	2900	1	4694	2873	Y160M1-2 / Y160M2-2	11 / 15
		2	5477	2853
		3	6259	2961
		4	7042	2912
		5	7824	2814
		6	8800	2667
		7	9690	2550
5.D	2900	1	6439	3550	Y160M2-2 / Y180M-2 / Y180L-2	15 / 18.5 / 22
		2	7513	3648
		3	8586	3058
		4	9659	3589
		5	10733	3310
		6	11800	3310
		7	12880	3170
6.3D	1450	1	6411	1402	Y132S-4 / Y132M-4 / Y160M-4	5.5 / 7.5 / 11
		2	7514	1441
		3	8508	1451
		4	9611	1372
		5	10735	1333
		6	11808	1315
		7	12882	1250
8.D	1450	1	13189	2275	Y180L-4 / Y200L-4	22 / 30
		2	15387	2363
		3	17585	2373
		4	19783	2336
		5	21982	2226
		6	24080	2085
		7	26378	2206
11.2D	1450	1	36190	4462	Y315S-4 / Y315M1-4 / Y315M2-4	110 / 132 / 160
		2	42272	4491
		3	48353	4658
		4	54285	4462
		5	60317	4570
		6	66349	4471
		7	72381	4324

Original scan (reference)

← Boiler Forced / Induced Draft Fans

GG/GY 2–6 t/h Boiler Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
GG2-1	2900	1	2500	2304	Y100L-2	3
		2	2780	2230
		3	3000	2136
		4	3250	2038
		5	3370	1960
		6	3500	1852
		7	3750	1695
GG4-1	2900	1	5000	2990	Y132S2-2	7.5
		2	6000	2704
		3	7000	2482
		4	8000	2255
		5	9000	1965
		6	10000	1670
		7	11000	1390
GG6-1	1450	1	7000	2109	Y132M-4	7.5
		2	8000	2046
		3	8750	1981
		4	9000	1928
		5	10000	1838
		6	11000	1648
		7	12000	1442
GY2-1	1450	1	3000	2510	Y132M-4	7.5
		2	4000	2684
		3	5000	2648
		4	6000	2511
		5	7000	2432
		6	7500	2305
GY4-1	1450	1	9500	3267	Y180M-4 / Y180L-4	18.5 / 22
		2	10800	3346
		3	11800	3326
		4	12900	3316
		5	13800	3300
		6	14400	3269
		7	15900	3236
GY10-15	1450	1	28317	3744	Y250M-4 / Y280S-4	55 / 75
		2	30211	3793
		3	31900	3822
		4	33458	3901
		5	34508	3655
		6	36746	3612

Original scan (reference)

Material-Conveying & Dust-Exhaust Fans

C6-48 / FC-6 / FXS, etc.

Product Introduction

Chantong's material-conveying and dust-exhaust fans include the C6-48, FC-6, FXS and SL5-45 models.

Primary Uses

Widely used for exhausting air mixtures containing dust, cotton fibres or similar particulates in cement plants, flour mills, textile mills, paper and printing plants, feed mills, furniture and woodwork factories.

Operating Conditions

Conveyed medium: air or other non-flammable, non-explosive gas mixtures free of sticky substances. Medium temperature −20 to 80°C, dust content ≤350 mg/m³.

Model Series

C6-48 Dust & Powder Exhaust Fan FC-6 Conveying Fan FXS Conveying Fan SL5-45 Dust-Exhaust Fan

Product Images by Model

← Material-Conveying & Dust-Exhaust Fans

C6-48 Dust & Powder Exhaust Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.15A	2900	1	1369	1587	Y90L-2	2.2
		2	1650	1546
		3	1933	1497
		4	2214	1426
		5	2495	1365
		6	2778	1272
		7	3060	1163
4.A	2900	1	2748	2594	Y132S1-2	5.5
		2	3352	2519
		3	3957	2430
		4	4562	2332
		5	5168	2205
		6	5770	2052
		7	6899	1859
4.C	1800	1	1705	999	Y90S-2	1.5
		2	2081	970
		3	2456	935
		4	2831	898
		5	3206	851
		6	3581	790
		7	3957	716
6.3C	1250	1	4442	1208	Y112M-4	4
		2	5321	1173
		3	5432	1138
		4	7588	1085
		5	8699	1019
		6	9856	941
		7	10781	855
8.C	1000	1	7276	1247	Y132M-4	7.5
		2	8717	1215
		3	10535	1173
		4	12430	1120
		5	14249	1049
		6	16144	971
		7	17660	882
10.C	800	1	11843	1304	Y160M-4	11
		2	14688	1274
		3	17604	1213
		4	20488	1141
		5	23331	1065
		6	26291	1065
		7	29134	882
12.5C	560	1	16191	997	Y132S-4 / Y132M-4	5.5 / 7.5
		2	19478	976
		3	22733	898
		4	24125	828
		5	28011	873
		6	31697	748
		7	35945	675

Original scan (reference)

← Material-Conveying & Dust-Exhaust Fans

FC-6 Conveying Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.2A	2900	1	2026	1545	Y90L-2	2.2
		2	2320	1484
		3	2615	1409
		4	2911	1313
		5	3207	1200
3.8A	2900	1	3403	2311	Y112M-2	4
		2	3923	2092
		3	4442	1967
		4	4962	1851
		5	5482	1692
4.5A	2900	1	5650	3235	Y132S2-2	7.5
		2	6512	2929
		3	7374	2782
		4	8237	2593
		5	9100	2434
5A	2900	1	7500	3848	Y160M2-2	15
		2	8822	3672
		3	10090	3486
		4	11430	3192
		5	12520	2900
6A	1450	1	6489	1385	Y132S-4	5.5
		2	7627	1322
		3	8723	1244
		4	9882	1150
		5	10824	1044
9A	1120	1	16755	1869	Y160L-4	15
		2	19789	1786
		3	22826	1648
		4	25676	1548
		5	28086	1407
12.C	1000	1	37943	2736	Y250M-4	55
		2	43639	2573
		3	50035	2400
		4	56030	2203
		5	62481	1988

Original scan (reference)

← Material-Conveying & Dust-Exhaust Fans

FXS Conveying Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
5.6C	2000	1	2520	2650	Y132S2-2	7.5
		2	2850	2640
		3	3380	2590
		4	3790	2580
		5	4210	2530
		6	4530	2455
		7	5040	2310
5.6C	2500	1	3150	4135	Y160M2-2	15
		2	3680	4130
		3	4200	4120
		4	4730	4080
		5	5260	4020
		6	5790	3835
		7	6300	3650
6.3C	1800	1	3250	2750	Y160M-4	11
		2	3800	2750
		3	4340	2740
		4	4880	2680
		5	5420	2620
		6	5960	2540
		7	6510	2400
8.C	1250	1	4420	1950	Y160M-4	11
		2	5160	1940
		3	5890	1900
		4	6620	1900
		5	7100	1870
		6	7810	1800
		7	8830	1700
10.C	1000	1	8967	3244	Y200L-4	30
		2	10484	3226
		3	11982	3210
		4	13480	3186
		5	14977	3088
		6	16475	2909
		7	17973	2631
12.C	1000	1	12928	3296	Y225M-4	45
		2	15080	3296
		3	17232	3277
		4	19368	3216
		5	21520	3136
		6	23696	3058
		7	25960	2842

Original scan (reference)

← Material-Conveying & Dust-Exhaust Fans

SL5-45 Dust-Exhaust Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
5.C	2000	1	3000	1618	Y132S-4	5.5
		2	3500	1554
		3	4000	1478
		4	4500	1391
		5	5000	1283
		6	5500	1182
		7	6000	1058
5.C	2300	1	3400	2150	Y132M-4	7.5
		2	4000	2050
		3	4600	1958
		4	5200	1837
		5	5800	1708
		6	6400	1545
		7	7000	1370
5.6C	2000	1	4220	2030	Y132S2-2	7.5
		2	4920	1949
		3	5620	1861
		4	6320	1745
		5	7030	1622
		6	7730	1483
		7	8430	1327
6.3C	1800	1	5220	2076	Y160M-4	11
		2	6100	2012
		3	7290	1902
		4	8320	1793
		5	9360	1616
		6	10390	1441
		7	11430	1244
7.1C	1600	1	6700	2103	Y160L-4	15
		2	8000	2008
		3	9300	1898
		4	10600	1767
		5	11900	1624
		6	13200	1445
		7	14500	1251
8.C	1400	1	8380	2044	Y160L-4	15
		2	9810	1946
		3	11250	1840
		4	13240	1720
		5	14885	1580
		6	15480	1409
		7	18100	1222
9.C	1200	1	10140	1903	Y180M-4	18.5
		2	11830	1820
		3	13525	1717
		4	15220	1598
		5	16920	1460
		6	18615	1303
		7	20190	1303

Original scan (reference)

Multi-Blade Low-Noise Fans

FDZ / FDG / FDT, etc.

Product Introduction

Chantong's multi-blade low-noise centrifugal fans include the FDZ and FDG single-inlet types, the DKT, the FDT double-inlet cabinet type, and the FKD frame-type air-conditioning fan.

Primary Uses

Widely used for ventilation in noise-sensitive environments — an ideal choice for environmental protection, HVAC and air purification, fire-smoke exhaust, kitchen equipment and a wide range of OEM applications.

Model Series

FDZ Eco Low-Noise Fan FDG Low-Noise Square Fan FDT Double-Inlet Cabinet Fan FKD Frame-Type Air-Conditioning Fan DKT Air-Conditioning External-Rotor Centrifugal Fan

Product Images by Model

DKT Air-Conditioning External-Rotor Centrifugal Fan

← Multi-Blade Low-Noise Fans

FDZ Eco Low-Noise Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Noise (dB)	Power (kW)
1.3A	2900	390-798	494-518	65	0.18
1.6A	2900	793-1160	763-950	68	0.37/0.55
1.9A	2900	1612-2230	854-1080	72	0.75
2.A	2900	1880-2580	946-1130	74	1.1
2.A	1450	987-1520	307-323	68	0.37
2.5A	2900	2674-4020	1539-1980	75	2.2
2.5A	1450	1740-2780	495-570	65	0.55/0.75
2.8A	1450	2560-3640	560-590	69	1.5
3.0A	1450	4430-5479	630-670	69	1.5
3.2A	1450	5433-6278	859-890	70	2.2
3.5A	1450	6363-7520	952-1058	72	3
4.A	1450	11285-12380	954-1380	74	5.5
4.A	960	8590-11800	708-930	71	2.2
4.5A	960	14330-17670	725-790	73	4
5A	960	13122-14580	1030-1050	75	5.5
6A	960	12000-21000	920-1600	77	11

Original scan (reference)

← Multi-Blade Low-Noise Fans

FDG Low-Noise Square Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Noise (dB)	Power (kW)
2.5A	1450	1740-2780	495-570	65	0.55/0.75
3.0A	1450	4430-5479	630-670	69	1.5
3.5A	1450	6363-7520	952-1060	72	3
4.A	1450	11285-12380	954-1380	74	5.5
4.A	960	8590-11800	708-930	71	2.2
4.5A	960	14330-17670	725-790	73	4
5A	960	13122-14580	1030-1050	75	5.5
5.5A	960	10000-18000	910-1230	76	7.5
6A	960	12000-21000	920-1600	77	11

Original scan (reference)

← Multi-Blade Low-Noise Fans

FDT Double-Inlet Cabinet Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Noise (dB)	Power (kW)
9"	1400	2100-3200	300-270	62	0.55
9"	1450	2500-4000	320-450	63	0.75
10"	1200	3000-4800	350-430	64	0.75
10"	1250	3600-5000	380-500	66	1.1
12"	1200	4200-5500	395-280	65	1.5
12"	1250	5300-7300	420-350	66	2.2
15"	850	6800-8800	355-450	65	1.5
15"	900	7800-12300	410-520	67	2.2
15"	950	8100-12800	430-600	68	3
18"	700	8300-11800	360-460	71	3
18"	750	9500-13500	425-485	72	4
18"	850	10500-15400	460-580	73	5.5
20"	750	10000-15700	395-480	71	4
20"	800	11800-17300	435-535	73	5.5
20"	850	14500-20600	440-560	75	7.5
22"	700	15000-19100	485-545	74	5.5
22"	750	18200-22100	560-660	75	7.5
22"	800	18900-25300	620-800	78	11
25"	610	19500-25800	460-680	75	7.5
25"	650	23500-29500	535-730	76	11
25"	680	24500-32800	610-800	77	15
28"	580	31500-40500	520-615	76	11
28"	610	32800-43800	580-685	78	15
28"	650	36100-47100	650-710	79	18.5
30"	580	34600-47500	480-570	78	15
30"	600	37800-51000	536-625	80	18.5
30"	650	44100-53500	615-725	81	22
33"	550	34800-57500	450-680	79	18.5
33"	580	38300-64000	520-830	81	22
33"	600	42800-69200	650-970	83	30
33"	650	44100-72500	710-1050	85	37

Original scan (reference)

← Multi-Blade Low-Noise Fans

FKD Frame-Type Air-Conditioning Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Noise (dB)	Power (kW)
9"	1400	2100-3200	300-270	62	0.55
10"	1200	3000-4800	350-430	64	0.75
12"	1250	5300-7300	420-350	66	2.2
15"	900	7800-12300	410-520	67	2.2
20"	800	11800-17300	435-535	73	5.5
25"	650	23500-29500	535-730	76	11
28"	610	32800-43800	580-685	78	15
33"	600	42800-69200	650-970	83	30

Original scan (reference)

← Multi-Blade Low-Noise Fans

DKT Air-Conditioning External-Rotor Centrifugal Fan

The DKT compact external-rotor centrifugal ventilator uses a low-noise, multi-wing centrifugal impeller with precision dynamic balancing, paired with a purpose-built external-rotor motor and a casing engineered for sound attenuation. It is compact, quiet, and attractively styled. The aerodynamic curve stays stable as duct conditions vary, ensuring adequate exhaust flow even in long ventilation runs. Designed specifically for acoustic ventilators and energy-recovery heat exchangers; also widely used for room ventilation and equipment cooling in buildings.

Features

Low-noise multi-wing centrifugal impeller, dynamically balanced
Purpose-built external-rotor motor, acoustically treated casing
Compact footprint and clean industrial design
Flat aerodynamic curve under varying duct resistance
Used in acoustic ventilators, heat-recovery units, building ventilation

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Voltage (V)	Noise (dB)	Power (kW)
2.5L	950	880-2500	180-200		68	0.25
2.5M	950	1775-3500	185-210		69	0.37
2.5H	1350	1700-3200	280-350		78	0.45
3.0M	950	2280-4000	330-360		70	0.55
3.5L	950	2800-5100	360-420		72	0.75
3.5M	950	3600-6300	420-460		73	1.1
4.0L	950	3950-6300	600-620		75	1.5
4.0M	950	5000-8900	560-630		76	2.2
4.0H	950	8500-12000	590-635		76	2.2
4.2H	950	5500-9000	670-735		77	2.2
4.5M	950	13600-18900	760-825		78	5.5
4.5H	950	15500-23000	780-830		78	7.5
DKT-140	2320	750	380	220V	62	0.1
DKT-140	2340	820	450	220V	65	0.16
DKT-160	2270	950	900	220V	68	0.22
DKT-190	2415	2300	1050	220V	70	0.32

Original scan (reference)

Axial-Flow Fans

T35 / DZ / SF / DWT, etc.

Product Introduction

Chantong's axial-flow line includes the T35, T40, DZ duct-type, DWT roof type, SF wall type, T30, BKL adjustable aluminium-blade type and SH portable type.

Primary Uses

Mainly used for local or whole-area ventilation and heat exhaust in workshops, plants, warehouses, offices, basements, tunnels and similar industrial / mining facilities.

Operating Conditions

Dust content ≤150 mg/m³. FRP and plastic versions are available for handling acidic / alkaline gases.

Model Series

T35 Axial-Flow Fan T40 C-Type Axial Fan T30 C-Type Axial Fan DZ Duct-Type Axial Fan SF Wall-Mounted Axial Fan DWT Axial-Flow Roof Fan BKL Adjustable Aluminium-Blade Axial Fan SH Portable Axial Fan

Product Images by Model

BKL Adjustable Aluminium-Blade Axial Fan

← Axial-Flow Fans

T35 Axial-Flow Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Blade Angle (°)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
No. 2.8	2900	15	1	1224	128	YSY-5622 / YSY-5632 / YSY-6322 / YSY-6332	0.12 – 0.37
		20	2	1742	141
		25	3	2560	143
		30	4	2495	165
		35	5	2778	166
No. 2.8	1450	15	1	613	32	YSY-5014 / YSY-5024	0.03 – 0.04
		20	2	873	35
		25	3	1133	36
		30	4	1251	41
		35	5	1392	47
No. 3.15	2900	15	1	1944	170	YSY-6322 / YSY-7122	0.18 – 0.55
		20	2	2681	187
		25	3	3418	189
		30	4	3753	218
		35	5	4155	247
No. 4	2900	15	1	3980	274	YT80-2 / YT90L-2	0.75 – 2.2
		20	2	5489	301
		25	3	6995	304
		30	4	7675	350
		35	5	8500	399
No. 5	1450	15	1	4289	113	YT80-4 / YT90L-4 / YT112M-4	0.37 – 2.2
		20	2	5793	125
		25	3	7273	126
		30	4	7907	146
		35	5	8712	165
No. 6.3	1450	15	1	8579	178	YT90S-4 / YT100L-4	0.75 – 2.2
		20	2	11528	197
		25	3	14477	198
		30	4	15817	231
		35	5	17426	262
No. 7.1	1450	15	1	12280	226	YT90L-2 / YT100L1-4 / YT100L2-4 / YT112M-4	1.5 – 4
		20	2	16501	251
		25	3	20722	253
		30	4	22641	293
		35	5	24944	331
No. 8	1450	15	1	17567	288	YT100L2-4 / YT112M-4 / YT132S-4 / YT132M-4	3 – 7.5
		20	2	23605	319
		25	3	29671	321
		30	4	32389	372
		35	5	35682	420

Original scan (reference)

← Axial-Flow Fans

T40 C-Type Axial Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Blade Angle (°)	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
No. 2.8	2900	20	1742	141	YSY-5632	0.18
No. 4	2900	25	5489	301	YT90L-2	2.2
No. 5	1450	25	3605	76	YSY-6114	0.25

Original scan (reference)

← Axial-Flow Fans

T30 C-Type Axial Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Noise (dB)	Power (kW)
3.5C	1450	6060	118	71	0.55
4.C	1450	7200	130	71	0.75
4.C	1450	7000	132	71	0.55
5.C	1450	11000	185	73	1.5
6.C	1450	13150	205	73	3
7.C	1450	15700	247	78	7.5
8.C	1450	24500	315	81	11
9.C	960	34890	340	82	7.5

Original scan (reference)

← Axial-Flow Fans

DZ Duct-Type Axial Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Noise (dB)	Power (kW)
3G-2	2900	2000-4000	210-105	66	0.37
3G-4	1450	1000-28000	100-56	56	0.18
3.5G-2	2900	4300-8000	280-120	68	0.75
4G-2	2900	5000-8000	350-150	72	1.5
5G-2	2900	2850-5500	180-110	75	3
6G-4	1450	8000-13000	450-175	66	0.75
7G-4	1450	8000-13000	180-120	68	1.5

Original scan (reference)

← Axial-Flow Fans

SF Wall-Mounted Axial Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Voltage (V)	Power (kW)
2.5B	2800	1400	125	220/380V	0.1
3.B	2800	2800	60	220/380V	0.12
3.5B	2800	3000	110	220/380V	0.18
4B	2800	4500	110	220/380V	0.25
5B	960	3000	60	380V	0.18
5.5B	960	3700	75	380V	0.37
6B	1450	6000	120	380V	0.55

Original scan (reference)

← Axial-Flow Fans

DWT Axial-Flow Roof Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Noise (dB)	Power (kW)
No.3	2900	2600-3300	235-182	65	0.37
No.3.5	2900	4150-5320	240-155	71	0.37
No.4	1450	4580-5700	190-136	67	0.55
No.4.5	1450	5600-6350	210-162	67	0.75
No.5	1450	9100-11000	236-150	69	1.1
No.6	1450	12500-17500	275-180	72	3

Original scan (reference)

← Axial-Flow Fans

BKL Adjustable Aluminium-Blade Axial Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Blade Angle (°)	Flow (m³/h)	Pressure (Pa)	Power (kW)
9.5" 2.4A	1450	45°	2740	55	0.19
11" 2.8A	1450	45°	4820	94	0.27
15" 3.8A	1450	17°	7740	443	1.1
19" 4.8A	1450	25°	10800	576	2.2
24" 6.1A	1450	28°	16920	316	4
30" 7.6A	960	40°	18980	200	7.5
38" 9.6A	960	7.5°	24480	223	11

Original scan (reference)

← Axial-Flow Fans

SH Portable Axial Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Blade Angle (°)	Flow (m³/h)	Pressure (Pa)	Power (kW)
2A	2900	48°	1500	245	0.22
2.5A	2900	10°	2380	294	0.25
3.A	2900	12°	3250	370	0.38

Original scan (reference)

Fire-Smoke Exhaust Axial Fans

HTF / SWF / SJG

Product Introduction

Chantong's fire-smoke exhaust axial fans include the HTF high-temperature fire fan, the FHL, the SWF mixed-flow type and the SJG diagonal-flow type.

Primary Uses

Mainly used for fire-smoke exhaust in tunnels, subways and basement / underground areas of high-rise buildings and shopping centres.

Operating Conditions

Medium temperature −20 to 80°C, relative humidity ≤90%. In firefighting service, the fan is rated to operate continuously for at least 30 minutes at a flue-gas temperature of 280°C.

Model Series

HTF Fire-Smoke Exhaust Axial Fan SWF Mixed-Flow Smoke Exhaust Fan SJG Diagonal-Flow Smoke Exhaust Fan FHL Mixed-Flow Ventilation Fan

Product Images by Model

← Fire-Smoke Exhaust Axial Fans

HTF Fire-Smoke Exhaust Axial Fan

Our fire-exhaust axial ventilator family covers the HTF high-temperature smoke extract, FHL, SWF mixed-flow, and SJG diagonal-flow product lines. The meridian-accelerating impeller design delivers high flow, high pressure, a wide performance envelope, and strong ventilation capability.

Features

Meridian-accelerating impeller — wide operating envelope
High flow, high pressure, strong ventilation capability
Medium: air or other non-explosive / non-flammable / non-corrosive / non-viscous gases
Medium temperature: −20 to 80 °C, relative humidity ≤ 90 %
Dust loading ≤ 150 mg/m³
Fire mode: continuous operation at 280 °C smoke temperature ≥ 30 minutes

Primary Uses

Smoke extraction in tunnels, subways, and underground mall levels
Ventilation/cooling/air-purification in workshops, mines, plants, basements, storage rooms
Large-area cooling and drying in production processes
Long-distance exhaust of foul air, fresh-air delivery, smoke and dust removal

Performance Specifications

Test conditions: Pa=101325, t=20 (cont.) / 280 (fire ≥30 min)°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Noise (dB)	Power (kW)
No.5	2900	6817-9824	752-510	80	3
No.6	1450	13197-16090	700-533	69	1.5
No.7	1450	18900-24380	728-610	78	3
No.8	1450	27613-33510	840-562	79	4
No.9	1450	39200-43200	840-723	80	5.5
No.10	1450	48500-51552	620-590	82	7.5
No.11	1450	56031-74708	807-449	84	11
No.12	1450	76041-93800	935-680	85	15

Original scan (reference)

← Fire-Smoke Exhaust Axial Fans

SWF Mixed-Flow Smoke Exhaust Fan

Features

Meridian-accelerating impeller — wide operating envelope
High flow, high pressure, strong ventilation capability
Medium: air or other non-explosive / non-flammable / non-corrosive / non-viscous gases
Medium temperature: −20 to 80 °C, relative humidity ≤ 90 %
Dust loading ≤ 150 mg/m³
Fire mode: continuous operation at 280 °C smoke temperature ≥ 30 minutes

Primary Uses

Smoke extraction in tunnels, subways, and underground mall levels
Ventilation/cooling/air-purification in workshops, mines, plants, basements, storage rooms
Large-area cooling and drying in production processes
Long-distance exhaust of foul air, fresh-air delivery, smoke and dust removal

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Power (kW)
4.A	1450	3053-3196	186-168	0.25
4.5A	1450	3392-4352	230-207	0.75
5A	1450	6121-7432	300-220	1.5
6A	1450	8121-10000	335-269	2.2
7A	1450	18636-25467	382-193	4
8A	960	36916-40054	371-288	7.5

Original scan (reference)

← Fire-Smoke Exhaust Axial Fans

SJG Diagonal-Flow Smoke Exhaust Fan

Features

Meridian-accelerating impeller — wide operating envelope
High flow, high pressure, strong ventilation capability
Medium: air or other non-explosive / non-flammable / non-corrosive / non-viscous gases
Medium temperature: −20 to 80 °C, relative humidity ≤ 90 %
Dust loading ≤ 150 mg/m³
Fire mode: continuous operation at 280 °C smoke temperature ≥ 30 minutes

Primary Uses

Smoke extraction in tunnels, subways, and underground mall levels
Ventilation/cooling/air-purification in workshops, mines, plants, basements, storage rooms
Large-area cooling and drying in production processes
Long-distance exhaust of foul air, fresh-air delivery, smoke and dust removal

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Power (kW)
3	1450	10000-5500	355-715	0.37
3.5	1450	7000-4000	100-350	0.75
4	1450	10000-5500	355-715	1.5
5	1450	18000-11000	280-600	3
6	1450	18000-21900	500-780	5.5
7	1450	29740-24400	400-847	15
8	1450	29740-24400	400-847	22

Original scan (reference)

Vortex, Medium-Pressure & Negative-Pressure Fans

HG vortex / TV medium-pressure / FPC negative-pressure

Product Introduction

Chantong manufactures the HG vortex air pump, the TV medium-pressure blower and the FPC negative-pressure fan.

Primary Uses

The HG vortex air pump is widely used in industry, hospitals and research. The TV medium-pressure blower is widely used for cooling and heat dissipation. The FPC negative-pressure fan is widely used for large-area workshop ventilation and cooling.

Model Series

HG Vortex Air Pump TV Medium-Pressure Blower FPC Negative-Pressure Fan

Product Images by Model

← Vortex, Medium-Pressure & Negative-Pressure Fans

HG Vortex Air Pump

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Voltage (V)	Power (kW)
HG series (representative)	2900	25-500	3000-15000	220/380V	0.2 – 7.5

Original scan (reference)

← Vortex, Medium-Pressure & Negative-Pressure Fans

TV Medium-Pressure Blower

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Voltage (V)	Noise (dB)	Power (kW)
TV-120	2900	120	900	220V	72	0.12
TV-180	2900	450	1100	220/380V	72	0.18
TV-250	2900	580	1200	220/380V	74	0.25
TV-370	2900	1050	1800	220/380V	78	0.37
TV-550	2900	1180	2000	220/380V	78	0.55
TV-750	2900	1320	2000	220/380V	80	0.75
TV-900	2900	1400	2100	220/380V	80	0.9
TV-1.1	2900	1480	2200	220/380V	80	1.1
TV-1.5	2900	1650	2500	380V	82	1.5
TV-2.2	2900	1800	2850	380V	84	2.2
TV-3.0	2900	2100	3200	380V	86	3

Original scan (reference)

← Vortex, Medium-Pressure & Negative-Pressure Fans

FPC Negative-Pressure Fan

The FPC series negative-pressure ventilator uses a precision-stamped casing and a reinforced welded assembly. The hub is built from composite stamped alloys, giving the fan higher flow, lower noise, and corrosion resistance. Combined with wet-curtain cooling, the system can hold indoor air at 26–30 °C — an ideal package for factory ventilation and cooling.

Features

Precision-stamped casing, reinforced welds
Stamped alloy hub — higher flow capacity
Corrosion-resistant alloy construction
Temperature-controlled purification to 26–30 °C
Ideal for factory cooling, ventilation, air purification

Primary Uses

Lateral wet-curtain cooling system
Longitudinal wet-curtain cooling system
Negative-pressure exhaust system

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Voltage (V)	Noise (dB)	Power (kW)
FPC-8	700	23000	55	380V	58	0.55
FPC-9	790	28000	58	380V	58	0.55
FPC-10	950	32000	62	380V	55	0.37
FPC-12	1110	37000	65	380V	60	0.75
FPC-13	1270	44500	88	380V	60	1.1

Original scan (reference)

Fans for Glass-Processing Machinery

FBG / FBC / FBQ, etc.

Product Introduction

Drawing on decades of experience matching equipment in deep-processing glass machinery, Chantong has developed a complete range of low-noise, high-efficiency, energy-saving fans dedicated to glass-processing equipment.

Primary Uses

Quench air for tempering furnaces, dryers for washers, air-flotation cutting tables, edge grinders, homogenisation / laminating furnaces, sand-blasting / shot-blasting and other end-to-end process equipment.

Special Notes

Chantong sincerely offers free technical consulting for the air-supply duct network of any glass-processing line, leveraging decades of OEM experience.

Model Series

FBG Tempering-Furnace Quench Fan FBC Glass-Washer OEM Fan FBQ Air-Flotation Cutting-Table Fan FBM Edge-Grinder OEM Fan FBJ Homogenisation / Laminating Furnace Fan FBS Sand-Blasting / Shot-Blasting Fan

Product Images by Model

← Fans for Glass-Processing Machinery

FBG Tempering-Furnace Quench Fan

The FBG series is our new-generation energy-saving, low-noise fan built specifically for glass tempering furnaces. In service for over ten years at specialist tempering-line OEMs (including Southglass Technology and others), the product ships to more than forty countries.

Features

Energy-saving: high aerodynamic efficiency, broad high-efficiency region, more energy-saving than legacy models
Low noise: quieter operation than comparable fans
Properly matched: selection tuned to furnace geometry and tempering recipe — motor rating can be reduced by one to two frames vs. stock solutions
Quality construction: impeller and shaft receive specialist treatment for low failure rates; fan ships fully assembled — easy install, no complex foundation, simple maintenance, long service life

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Power (kW)
18.5D	1450	64000-56000	14000-18000	280-315
17.5D	1450	60000-52000	14000-18000	220-250
17.D	1450	48000-40000	14000-18000	160-200
16.D	1450	99000-70000	8000-10000	220-250
14.5D	1450	73000-65000	7000-9000	160-200
14.D	1450	140000-110000	4000-6000	200-220
13.E	1450	130000-115000	3500-4000	132-110
12.E	1450	93000-100000	3000-3500	75-90
11.E	1450	76000-58000	2500-3000	45-50

Original scan (reference)

← Fans for Glass-Processing Machinery

FBC Glass-Washer OEM Fan

The FBC series is the result of years of OEM experience — a refined, energy-saving, low-noise product for glass washer/dryer lines. Drying-air speed exceeds 12 m/s, eliminating the traditional pain points of high power draw, high noise, and incomplete drying. Requires proper matching to the supply ductwork and air knives.

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Power (kW)
1.6A	2900	790-1160	780-950	0.37
1.9A	2900	1620-2300	860-1100	0.75
2.0A	2900	1980-2600	950-1150	1.1
2.5A	1450	1740-2780	495-580	0.55
2.8A	1450	2600-3650	560-600	1.1
3.0A	1450	4450-5500	610-680	1.5
2.5A	2900	2670-4020	1540-1980	2.2
3.0A	2900	4500-5600	2600-2800	3
5.2A	2900	2600-3800	5000-6000	3-5.5
5.8A	2900	3600-4800	5000-6000	7.5-11
6.0A	2900	5700-6900	5000-6000	11-15
6.2A	2900	8400-9600	5500-6800	15-18.5
6.4A	2900	8200-10000	6600-7600	18.5-22
6.7A	2900	10000-12000	6600-7600	22-30

Original scan (reference)

← Fans for Glass-Processing Machinery

FBQ Air-Flotation Cutting-Table Fan

The FBQ series is a dedicated fan for glass air-float tables: wide flow range, stable high pressure, compact, easy to install, capable of floating 2–19 mm glass. Fitted with a flow-control damper and an inlet silencer for noise reduction.

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Power (kW)
I	2900	2000-5000	3000-4000	3
II	2900	3000-6000	3000-4000	4
III	2900	4000-7000	3000-4000	5.5

Original scan (reference)

← Fans for Glass-Processing Machinery

FBM Edge-Grinder OEM Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Power (kW)
I	2900	960-1200	3800-4100	0.75
II	2900	1100-1400	2300-2700	1.1
III	2900	1000-1300	3800-4100	1.5
IV	2900	1300-1800	5000-5300	2.2

Original scan (reference)

← Fans for Glass-Processing Machinery

FBJ Homogenisation / Laminating Furnace Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Power (kW)
3.0A.C	1450	4400-5500	630-670	1.5
3.5A.C	1450	6400-7600	960-1050	2.2
4A.C	960	8600-12000	710-940	2.2
4.5A.C	960	13200-14600	1030-1050	4

Original scan (reference)

← Fans for Glass-Processing Machinery

FBS Sand-Blasting / Shot-Blasting Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Power (kW)
1.6	2900	832-1220	800-998	0.37
1.9A	2900	1693-2340	897-1135	0.75
2.0A	1450	1040-1600	325-350	0.37
2.5A	1450	1830-2920	520-600	0.55

Original scan (reference)

Fans for Food-Processing Machinery

FPS-12

Product Introduction

The FPS-12 circulation fan is purpose-designed by Chantong for food-machinery production lines.

Primary Uses

Suitable for providing strong hot-air circulation or moisture extraction on automated drying lines for rice noodles, potato products, noodles and similar food processing.

Operating Conditions

Medium temperature −20 to 80°C, dust and hard-particle content ≤150 mg/m³.

Model Series

FPS-12 Food-Machinery OEM Fan FPS-12 (C-Type Belt Drive)

Product Images by Model

← Fans for Food-Processing Machinery

FPS-12 Food-Machinery OEM Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.6A	2900	1	4930	1890	Y112M-2	4
		2	4775	1839
		3	5830	1783
		4	5480	1748
		5	6540	1710
		6	7130	1482
		7	8316	1265
3.6A	1450	1	2470	497	Y802-2	0.75
		2	2690	471
		3	2915	445
		4	3240	437
		5	3570	427
		6	3880	370
		7	4160	313
4.A	2900	1	6770	2920	Y132S2-2	7.5
		2	7380	2772
		3	8000	2380
		4	8760	2420
		5	9425	2110
		6	10600	1843
		7	11400	1550
4.5A	2900	1	9640	3110	Y160M2-2	15
		2	10810	3056
		3	11400	2786
		4	12460	2622
		5	13860	2475
		6	15000	2315
		7	16240	1980
4.5A	1450	1	4820	776	Y100L1-4	2.2
		2	5250	727
		3	5890	698
		4	6380	683
		5	6970	668
		6	7545	580
		7	8120	490
5A	1450	1	6810	907	Y100L2-4	3
		2	7210	890
		3	7810	860
		4	8686	842
		5	9440	778
		6	10350	715
		7	11140	605

Original scan (reference)

← Fans for Food-Processing Machinery

FPS-12 (C-Type Belt Drive)

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
5.A	960	1	4380	420	Y90L-6	1.1
		2	4775	409
		3	5090	378
		4	5750	370
		5	6350	362
		6	6850	315
		7	7375	265
5.2A	1450	1	8200	1130	Y112M-4	4
		2	8940	1023
		3	9685	968
		4	10770	943
		5	11590	819
		6	12830	845
		7	13800	650
5.2A	960	1	5431	473	Y100L-6	1.5
		2	5840	445
		3	6140	423
		4	6595	408
		5	7550	390
		6	8494	354
		7	9145	298
5.6A	1450	1	9286	1204	Y132S-4	5.5
		2	10130	1140
		3	10972	1080
		4	11956	1058
		5	13090	1035
		6	14540	897
		7	15650	760
6.2A	1450	1	12600	1470	Y160M-4	11
		2	13180	1400
		3	14090	1320
		4	14990	1220
		5	16240	1270
		6	19730	1100
		7	21240	930

Original scan (reference)

Fans for Aluminium-Processing Equipment

Ageing furnace / homogenisation furnace / die furnace OEM

Product Introduction

Chantong designs dedicated fans for the discharge tables, die furnaces, billet furnaces, ageing furnaces and homogenisation furnaces used in aluminium processing.

Primary Uses

Suitable for high-flow air supply and ultra-high-pressure quenching during aluminium production and forming processes.

Model Series

FDZ Discharge-Table Cooling Fan DZ Discharge-Table Cooling Fan Furnace-Use Axial High-Temperature Circulation Fan Vertical Die-Furnace Circulation Fan Ageing-Furnace Fan Homogenisation-Furnace Fan Aluminium Billet Furnace Stainless-Steel Fan

Product Images by Model

Furnace-Use Axial High-Temperature Circulation Fan

Aluminium Billet Furnace Stainless-Steel Fan

← Fans for Aluminium-Processing Equipment

FDZ Discharge-Table Cooling Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Power (kW)
1.6	2900	1160	950	0.37
1.9	2900	2230	1100	0.75
2.0	2900	2600	1200	1.1

Original scan (reference)

← Fans for Aluminium-Processing Equipment

DZ Discharge-Table Cooling Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Power (kW)
I	1450	5800	150	0.37
II	1450	9500	200	0.75
III	1450	12000	220	1.1

Original scan (reference)

Fans for Packaging Machinery

WL-12 / WL-13 / WQZ, etc.

Product Introduction

Chantong's packaging-machinery OEM line includes the WL-12, WL-13, WQX and WQZ models.

Primary Uses

Purpose-designed for corrugated-board production machinery — suitable for high-vacuum suction, high-speed printing and similar processes.

Operating Conditions

Medium temperature −20 to 80°C, dust and hard-particle content ≤150 mg/m³.

Model Series

WL-12 Corrugated-Board Vacuum Fan WL-13 Cardboard Slitting Suction Fan WQZ Paper-Cutting Waste-Removal Fan WQX Cardboard Bridge Suction Fan WL-1 Cardboard Slitting / Flipping Suction Fan

Product Images by Model

WL-1 Cardboard Slitting / Flipping Suction Fan

← Fans for Packaging Machinery

WL-12 Corrugated-Board Vacuum Fan

The WL-12 ultra-high-pressure centrifugal fan is a purpose-built product developed from OEM experience with corrugator and carton-line machinery. Proven over many years at packaging-machinery and carton-factory customers worldwide — an excellent match for corrugator vacuum-hold-down service.

Features

High suction and flow — handles a wide range of flute thicknesses and web widths
Energy-saving, resistant to overload — strong economic return
Integrated single-piece construction — light enough for raised-platform install
Quiet operation — outlet silencer optional
Clean industrial styling, easy install, smooth and reliable running, simple maintenance

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
6.A	2900	1800	9200	Y132S1-2	5.5
6.3A	2900	2080	10100	Y132S2-2	7.5
7.0A	2900	2730	11100	Y160M1-2	11
7.1A	2900	2900	11700	Y160M2-2	15

Original scan (reference)

← Fans for Packaging Machinery

WL-13 Cardboard Slitting Suction Fan

The WL-13 high-pressure centrifugal fan is a dedicated accessory for carton-printing slotter machines.

Features

Matched suction and high flow — handles 3-, 5-, and 7-layer corrugated boards up to 2.8 m wide
Stable performance over a wide flow range; tolerant of minor equipment leakage
Wide impeller passages self-clean by carrying paper fines and dust out with the airflow
Energy-saving, low power consumption
Integrated compact construction — mounts on the machine platform and travels with it, vibration negligible
Quiet operation — outlet silencer optional
Clean styling, easy install, reliable, simple maintenance

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.6A	2900	1	2100	3400	Y100L-2	3
		2	2200	3300
		3	2300	3310
		4	2400	3250
		5	2500	3200
		6	2600	3100
		7	2700	3010
4.A	2900	1	2320	3980	Y112M-2	4
		2	2530	3540
		3	2730	3420
		4	2930	3470
		5	3140	3330
		6	3345	3280
		7	3550	3135
4.5A	2900	1	3000	4030	Y132S1-2	5.5
		2	3270	3990
		3	3540	3950
		4	3810	3870
		5	4050	3720
		6	4310	3550
		7	4600	3450
4.8A	2900	1	3640	4085	Y132S2-2	7.5
		2	3970	4040
		3	4300	3980
		4	4610	3840
		5	4820	3720
		6	5250	3610
		7	5580	3230

Original scan (reference)

← Fans for Packaging Machinery

WQZ Paper-Cutting Waste-Removal Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
5.C	2240	1	1600	2745	Y132M-4	7.5
		2	2360	2680
		3	3110	2590
		4	3870	2380
		5	4620	2135
		6	5380	1850
		7	6240	1530
5.C	2500	1	1780	3420	Y160M-4	11
		2	2630	3340
		3	3470	3190
		4	4320	2960
		5	5150	2680
		6	6000	2320
		7	6950	1920
6.C	2000	1	2470	3420	Y160M-4	11
		2	3640	3420
		3	4800	3270
		4	5930	3020
		5	7140	2720
		6	8310	2375
		7	9620	1950
6.C	2240	1	2770	3955	Y160L-4	15
		2	4080	3880
		3	5380	3690
		4	6690	3425
		5	7990	3075
		6	9300	2665
		7	10780	2200
6.8C	1600	1	2880	2880	Y132M-4 / Y160M-4	7.5 / 11
		2	4240	2820
		3	5600	2688
		4	6960	2496
		5	8320	2240
		6	9680	1950
		7	11200	1600
6.8C	1800	1	3240	3650	Y160M-4 / Y160L-4	11 / 15
		2	4770	3560
		3	6300	3400
		4	7830	3160
		5	9380	2830
		6	10890	2470
		7	12600	2020
6.8C	2000	1	3600	4500	Y160L-4 / Y180M-4	15 / 18.5
		2	5300	4400
		3	7000	4200
		4	8700	3900
		5	10400	3500
		6	12100	3050
		7	14000	2500
6.8C	2240	1	4030	5080	Y180L-4 / Y200L-4	22 / 30
		2	5940	4960
		3	7840	4740
		4	9740	4400
		5	11640	3950
		6	13550	3440
		7	15680	2820

Original scan (reference)

← Fans for Packaging Machinery

WQX Cardboard Bridge Suction Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
3.6A	2900	1	1603	3120	Y90L-2	2.2
		2	1726	3094
		3	1851	3090
		4	1978	2984
		5	2100	2922
		6	2222	2837
		7	2347	2780
3.8A	2900	1	1890	3467	Y100L-2	3
		2	2036	3438
		3	2182	3408
		4	2327	3316
		5	2473	3246
		6	2618	3152
		7	2765	3066
4.0A	2900	1	2200	3860	Y112M-2	4
		2	2370	3800
		3	2540	3770
		4	2710	3690
		5	2880	3610
		6	3050	3510
		7	3220	3410
4.3A	2900	1	2726	4468	Y132S1-2	5.5
		2	2936	4431
		3	3145	4387
		4	3355	4273
		5	3567	4184
		6	3775	4062
		7	3987	3952

Original scan (reference)

Fans for Cement Production

SC-12 / SX-12 / FSR, etc.

Product Introduction

Chantong's dedicated cement-production fans include the SC-12 dust-collection fan, the SX-12 air-slide fan and the FSR roots blower.

Primary Uses

The SX-12 air-slide blower is purpose-designed to provide a high-pressure air source for the floating bed of pneumatic air-slide conveyors used in cement transport.

Operating Conditions

Medium temperature −20 to 80°C, dust and hard-particle content ≤150 mg/m³.

Model Series

SC-12 Dust-Collection Fan SX-12 Pneumatic Air-Slide Blower FSR Roots Blower

Product Images by Model

← Fans for Cement Production

SC-12 Dust-Collection Fan

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
6.3C	1120	1	4768	969	Y100L2-4 / Y112M-4	3 / 4
		2	5763	944
		3	6799	911
		4	7794	870
		5	8831	818
		6	9080	755
6.3C	1250	1	5321	1208	Y112M-4 / Y132S-4	4 / 5.5
		2	6432	1177
		3	7588	1136
		4	8699	1085
		5	9855	1019
		6	10781	941
6.3C	1600	1	6811	1984	Y132M-4 / Y160M-4	7.5 / 11
		2	8233	1934
		3	9713	1866
		4	11134	1782
		5	12615	1673
		6	13799	1545
8.C	1000	1	8717	1247	Y132M-4	7.5
		2	10536	1222
		3	12430	1177
		4	14249	1120
		5	16068	1052
		6	17680	971
8.C	1120	1	9763	1586	Y132M-4 / Y160M-4	7.5 / 11
		2	11799	1532
		3	13922	1472
		4	15959	1406
		5	18002	1321
		6	19779	1219
8.C	1250	1	10895	1953	Y160L-4	15
		2	13169	1903
		3	15538	1834
		4	17812	1753
		5	20180	1649
		6	22075	1521

Original scan (reference)

← Fans for Cement Production

SX-12 Pneumatic Air-Slide Blower

Performance Specifications

Test conditions: Pa=101325, t=20°C

Model / Type	Speed (rpm)	No.	Flow (m³/h)	Pressure (Pa)	Motor	Power (kW)
10.C	800	1	14685	1304	Y160M-4 / Y160L-4	11 / 15
		2	17646	1213
		3	20488	1215
		4	23331	1141
		5	26291	1078
		6	29134	978
10.C	900	1	16521	1653	Y160L-4 / Y180M-4	15 / 18.5
		2	19858	1615
		3	23052	1533
		4	26247	1445
		5	29577	1362
		6	32776	1238
10.C	1000	1	18356	2043	Y180M-4 / Y180L-4	18.5 / 22
		2	22057	1961
		3	25610	1895
		4	29163	1802
		5	32864	1667
		6	36417	1530
12.5C	630	1	22587	1264	Y160L-4 / Y180M-4	15 / 18.5
		2	27146	1234
		3	31813	1170
		4	36406	1086
		5	40349	1031
		6	44811	947
12.5C	710	1	25455	1607	Y180L-4 / Y200L-4	22 / 30
		2	30588	1570
		3	35855	1480
		4	40564	1311
		5	45506	1204
		6	50501	1204
12.5C	800	1	28822	1996	Y225S-4	37
		2	34665	1908
		3	40017	1900
		4	45968	1787
		5	51681	1656
		6	56902	1510
4.2A (空气斜槽)	2900	1	650	4650	Y90S-2 / Y90L-2	1.5 / 2.2
		2	710	4350
		3	780	4190
		4	850	4150
		5	920	4090
		6	1030	4050
4.5A (空气斜槽)	2900	1	920	5100	Y100L-2 / Y112M-2	3 / 4
		2	1020	5140
		3	1110	5150
		4	1210	5150
		5	1320	5150
		6	1460	5000
5.2A (空气斜槽)	2900	1	1300	6600	Y132S-2 / Y132S2-2	5.5 / 7.5
		2	1420	6620
		3	1560	6820
		4	1720	6720
		5	1880	6720
		6	2040	6630
5.6A (空气斜槽)	2900	1	1810	8250	Y132S2-2 / Y160M1-2	7.5 / 11
		2	1990	8220
		3	2200	8280
		4	2410	8290
		5	2620	8280
		6	2830	8230
6.A (空气斜槽)	2900	1	1970	9600	Y160M1-2 / Y160M2-2	11 / 15
		2	2220	9600
		3	2480	9600
		4	2740	9600
		5	3000	9500
		6	3200	9460
7.A (空气斜槽)	2900	1	3430	12900	Y180M-2 / Y200L1-2	22 / 30
		2	3710	13000
		3	4000	13000
		4	4290	13080
		5	5150	12700
		6	5430	12300

Original scan (reference)

← Fans for Cement Production

FSR Roots Blower

FSR three-lobe Roots blower package serves mid-to-low-pressure air supply for cement, chemical, wastewater, and pneumatic conveying applications. Pressure-rise range 0.2–0.75 kgf/cm² (≈ 20–75 kPa).

Overview specifications

Model	Speed (r/min)	Pressure range (kPa)	Flow range (m³/min)	Motor power (kW)
FSR-80	970 – 1900	20 – 75	1.0 – 7.0	2.2 – 11
FSR-90	970 – 1740	20 – 75	2.0 – 10.0	3.0 – 15
FSR-100	970 – 1730	20 – 75	3.5 – 14.0	5.5 – 22
FSR-125	900 – 1450	20 – 75	6.0 – 20.0	11 – 37
FSR-150	900 – 1450	20 – 75	8.0 – 28.0	15 – 55
FSR-175	740 – 1300	20 – 75	12 – 48	22 – 90
FSR-200	740 – 1300	20 – 75	18 – 70	37 – 132
FSR-250	600 – 1000	20 – 75	35 – 120	75 – 220

Note: The full 2-D performance matrix (pressure-rise × speed → flow / specific power) is shown in the original scan below. Contact our sales engineers for precise selection.

Performance Specifications

The specification tables below are shown in their original form. Please contact our sales engineers for an English explanation of any parameter.

Fans for Coating & Painting Equipment

TZ01 / TZ02 / PFG-12, etc.

Product Introduction

Hot-air circulation fans dedicated to the coating industry, powder-recovery fans for spray booths, and the FPC-12 strong-air fan for ceramic and glass suction / drying systems.

Primary Uses

The FPC-12 is mainly used in glass washers and ceramic polishing / edging cleaning lines where strong air flow is required to blow water off the workpiece.

Model Series

TZ01 Hot-Air Circulation Fan TZ02 Hot-Air Circulation Fan PFG-12 Spray-Booth Powder Recovery Fan FPC-12 Ceramic Air-Drying Fan

Product Images by Model

Fans for Plastic-Processing Machinery

Plastic machinery OEM

Product Introduction

Chantong designs dedicated fans for the various lines of plastic-processing equipment.

Primary Uses

Suitable for high-flow air intake and ultra-high-pressure quenching during plastic production and forming processes.

Operating Conditions

Medium temperature −20 to 80°C, dust and hard-particle content ≤150 mg/m³.

Model Series

Plastic-Machinery Dedicated OEM Fan